/hammond-project-boxes

This project contains EAGLE design blocks and these blocks are PCB outlines for Kradex project boxes. The board outlines are on the dimension layer and the real size of the project box can be seen on the document layer.

hammond-project-boxes

EAGLE design blocks made for Hammond project boxes. I've used AutoCAD to export the proper .dfx files from the factory given 3D models than I imported them to Eagle with the import-dfx ULP. The outline of the box's inner part and the dimensions of the PCB can be seen on the document layer.

How to use them

  • Copy the design blocks (with .dbl extension) to the where they are stored by Eagle. It is usually the following on Windows: C:\Users<username>\Documents\EAGLE\design blocks
  • During the board layout process click on the "Add a Design Block" button then select the desired one. With one click place it where you want and delete the original board dimensions if it's required.

Currently available PCB dimension design blocks

1551 Series: https://www.hammfg.com/electronics/small-case/plastic/1551

  • 1151RFLBK, 1151RBK
    • Height: 20 mm
    • Width: 50 mm
    • Length: 50 mm