Pinned Repositories
0816-feeder-firmware
Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
18650_Charger
Arduino + TP4056 graphic batttery charger
4_Axis_SPI_CNC
4 Axis CNC Controller for Grbl_ESP32
6-AXIS-USBCNC-GRBL
This repository is based on https://github.com/usbcnc/grbl which in turn is based on native grbl 1.1f https://github.com/gnea/grbl
AudioControlPT2257
Arduino library for the PT2257 chip
BIGTREETECH-S42A-V1.0
The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed
BIGTREETECH-SKR-V1.1
32bit board with LPC1768, support marlin2.0 and smoothieware
BIGTREETECH-SKR-V1.3
32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
BIGTREETECH-TFT35-V1.2
3.5inch Serial Port Touch Screen, Support Marlin/Smoothieware/etc..
grbl_controller_esp32
grbl controller for esp32
irshadmgs011's Repositories
irshadmgs011/4_Axis_SPI_CNC
4 Axis CNC Controller for Grbl_ESP32
irshadmgs011/Blynk-4-Channel-Relay-Status-Sync-with-Physical-Button
Blynk: 4 channel relay status sync with Blynk app, Relay and with Physical button/Switch/Push button. If you perform ON/OFF with Physical Switch/Push button switch it lets you change the ON/OFF status on Blynk app as well.
irshadmgs011/CNC_Breakout_Nucleo64
CNC breakout for STM324F411 and ST32F446 development boards
irshadmgs011/cncboy
CNC Boy Console
irshadmgs011/Configurations
Configurations for Marlin Firmware
irshadmgs011/dcservo
Position control of DC motors
irshadmgs011/E4d-box-project
E4d@box-project
irshadmgs011/ESP32-Reflow-Controller
Reflow controller with ESP32 and TFT LCD on board.
irshadmgs011/ESP32-RGB64x32MatrixPanel-I2S-DMA
An experimental Adafruit GFX Compatible Library for ESP32 and HUB75 RGB LED Panels. Using DMA to drive the panel for higher refresh rates.
irshadmgs011/esp32_ili9341
LittlevGL ported to ESP32 using ILI9341 display controller
irshadmgs011/ESP32_Plotter_Controller
An ESP32/TMC2130 based 2 axis controller designed for pen plotters
irshadmgs011/ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
irshadmgs011/FreeCAD-library
A library of Parts for FreeCAD. WARNING - This library is huge. It might take a long time to download and make the addons manager unresponsive for many minutes.
irshadmgs011/grbl-LPC
Multiple compiled versions for different boards & machines (under releases)
irshadmgs011/grbl32
GRBL 1.1f CNC Controller forked/ported to STM32 ARM : STM32F103 and STM32F407
irshadmgs011/HASS-sonoff-ewelink
Home Assistant component to control Sonoff/eWeLink devices with original firmware
irshadmgs011/index
The Index is an open source pick and place machine.
irshadmgs011/inkstitch
Ink/Stitch: an Inkscape extension for machine embroidery design
irshadmgs011/LDmicro
This is LDmicro support repository
irshadmgs011/lvgl
Powerful and easy-to-use embedded GUI with many widgets, advanced visual effects (opacity, antialiasing, animations) and low memory requirements (16K RAM, 64K Flash).
irshadmgs011/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
irshadmgs011/MPCNC-TFT35-V2.0
Custom firmware for the BigTreeTech TFT35 V2.0 for use with the MPCNC
irshadmgs011/nanoReflowController
Reflow Oven Controller. See below for more information.
irshadmgs011/NCMate
Fluid-NC Motion Controller Hardware
irshadmgs011/New-Blynk--IR---Manual-Switches-controlled-Home-Automation
irshadmgs011/Power-Boards
Collection of DC/DC Converters, Battery Chargers and Power Supplies
irshadmgs011/Radio
An Arduino library to control FM radio chips like SI4703, SI4705, RDA5807M, TEA5767.
irshadmgs011/sonoff_registered_devices
List all registered devices using eWelink
irshadmgs011/SuperGerbil
STM32 driven ARM Grbl firmware
irshadmgs011/wirebender
Precise wire bending CNC machine for wires at 1mm and less in diameter.