IET_Faraday_2019

Welcome everyone, below you will find links on how to get started.

1) Download Arduino IDE.

Select your respective platform, download and install Arduino IDE. Link: https://www.arduino.cc/en/Main/Software

2) Installing Maker Uno Driver

In order to be able to use Maker Uno, you have to install CH341 Follow the instructions afterwards, upload Blink sample code If you Arduino starts blinking, you are good to go to the next step.
Link: https://makeruno.com.my/getting-started/

3) All necessary files

On the right side, below contributor, there is a green button that says "Clone or download" Select "download as ZIP". Link: https://github.com/steveLim0928/IET_Faraday_2019 ,

4) Unzip the files.

After downloading, unzip it

5) Capacitive sensor library.

a) Open Arduino IDE b) On the top, select: Sketch > Include Library > Add .ZIP Library > select "CapacitiveSensor.zip". For more details related to "CapacitiveSensor" library, please visit: https://playground.arduino.cc/Main/CapacitiveSensor/

You are all set and done. Good luck and all the best. Adapted from https://github.com/steveLim0928/IET_Faraday_2019