/gl-infra-builder

Primary LanguagePython

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

$ sudo apt install binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev make4.1+ perl python3.6+ rsync subversion unzip which libncurses5-dev zlib1g-dev gawk gcc-multilib g++-multilib flex git-core gettext libssl-dev ocaml sharutils re2c -y

And This development tools requires Python 3.6 or higher! Please use the following command to check,

$ python3 --version
Python 3.6.13

$ ls -l /usr/bin/python3*
 /usr/bin/python3 -> python3.6
 /usr/bin/python3.5
 /usr/bin/python3.5-config -> x86_64-linux-gnu-python3.5-config
 /usr/bin/python3.5m
 /usr/bin/python3.5m-config -> x86_64-linux-gnu-python3.5m-config
 /usr/bin/python3.6
 /usr/bin/python3.6-config -> x86_64-linux-gnu-python3.6-config
 /usr/bin/python3.6m
 /usr/bin/python3.6m-config -> x86_64-linux-gnu-python3.6m-config
 /usr/bin/python3.9
 /usr/bin/python3.9-config -> x86_64-linux-gnu-python3.9-config
 /usr/bin/python3-config -> python3.5-config
 /usr/bin/python3m -> python3.5m
 /usr/bin/python3m-config -> python3.5m-config

Compile OpenWrt firmware(No GL.iNet packages)

  1. Run git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder to clone repository

  2. Run ls configs -hl to list the openwrt verizon

  3. Chose your want version, for example, if you want to use openwrt-21.02.2, Run python3 setup.py -c configs/config-21.02.2.yml to download openwrt-21.02.2 source code

  4. Run cd openwrt-21.02/openwrt-21.02.2 to enter openwrt-21.02.2 directory

  5. Run ./scripts/gen_config.py list to get target_xxx and glinet_xxx files. target_xxx is you want to compile products, don't modify. glinet_xxx is you want to add/delete packages, you can modify. Those files in the profiles directory.

  6. Run ./scripts/gen_config.py <target_profile> <function_profile> to chose the product target and add some packages. <target_profile> is you want to compile products. <function_profile> is you want to add/delete packages.

  7. For example, If you want to compile GL-A1300 product and add luci, you can run ./scripts/gen_config.py target_ipq40xx_gl-a1300 luci. You can run make menuconfig to chose other packages

  8. Run make to build your firmware.

Compile GL.iNet standard firmware

  1. Base on the steps above, at openwrt-21.02/openwrt-21.02.2 directory, run git clone https://github.com/gl-inet/glinet4.x.git to get GL.iNet packages.

  2. Run ./scripts/gen_config.py target_ipq40xx_gl-a1300 glinet_depends to add A1300 GL.iNet packages

  3. Run make V=s -j5 GL_PKGDIR=pwd/glinet4.x/ipq40xx/ to compile GL.iNet standard firmware.

Example compile firmware

0.Compile 360T7（2023.2.27）

0.0

with gl-inet package installed,original partition is not big enough,you should flash the bl blow.

https://github.com/hanwckf/bl-mt798x

1.1 Compile 360t7-108M OpenWrt firmware(No GL.iNet packages)

 git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder

 python3 setup.py -c configs/config-mt798x-7.6.6.1.yml && cd mt7981

 ./scripts/gen_config.py target_mt7981_360t7-108M luci

1.2 Compile 360t7-108M GL.iNet standard firmware

 git clone https://github.com/gl-inet/glinet4.x.git

 cp ./glinet4.x/pkg_config/gl_pkg_config_mt7981_mt3000.mk  ./glinet4.x/mt7981/gl_pkg_config.mk

 ./scripts/gen_config.py target_mt7981_360t7-108M glinet_depends

 make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/mt7981/

1. Compile MT2500(2023.02.22)

1.1 Compile MT2500 OpenWrt firmware(No GL.iNet packages)

 git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder

 python3 setup.py -c configs/config-mt798x-7.6.6.1.yml && cd mt7981

 ./scripts/gen_config.py target_mt7981_gl-mt2500 luci

 make V=s -j5

1.2 Compile MT2500 GL.iNet standard firmware

 git clone https://github.com/gl-inet/glinet4.x.git

 cp ./glinet4.x/pkg_config/gl_pkg_config_mt7981_mt2500.mk  ./glinet4.x/mt7981/gl_pkg_config.mk

 ./scripts/gen_config.py target_mt7981_gl-mt2500 glinet_depends

 make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/mt7981/

2. Compile MT3000(2023.02.22)

2.1 Compile MT3000 OpenWrt firmware(No GL.iNet packages)

 git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder

 python3 setup.py -c configs/config-mt798x-7.6.6.1.yml && cd mt7981

 ./scripts/gen_config.py target_mt7981_gl-mt3000 luci

 make V=s -j5

2.2 Compile MT3000 GL.iNet standard firmware(Base on the steps above)

 git clone https://github.com/gl-inet/glinet4.x.git

 cp ./glinet4.x/pkg_config/gl_pkg_config_mt7981_mt3000.mk ./glinet4.x/mt7981/gl_pkg_config.mk

 ./scripts/gen_config.py target_mt7981_gl-mt3000 glinet_depends

 make -j5 V=s GL_PKGDIR=`pwd`/glinet4.x/mt7981/

3. Compile AXT1800(2023.02.22)

3.1 Compile AXT1800 OpenWrt firmware(No GL.iNet packages)

 git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder

 python3 setup.py -c configs/config-wlan-ap.yml && cd wlan-ap/openwrt

 ./scripts/gen_config.py target_wlan_ap-gl-axt1800 luci

 make V=s -j5

3.2 Compile AXT1800 GL.iNet standard firmware(Base on the steps above)

 git clone https://github.com/gl-inet/glinet4.x.git

 ./scripts/gen_config.py target_wlan_ap-gl-axt1800 glinet_depends

 make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/ipq60xx/

4. Compile AX1800(2023.02.22)

4.1 Compile AX1800 OpenWrt firmware(No GL.iNet packages)

 git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder

 python3 setup.py -c configs/config-wlan-ap.yml && cd wlan-ap/openwrt

 ./scripts/gen_config.py target_wlan_ap-gl-ax1800 luci

 make V=s -j5

4.2 Compile AX1800 GL.iNet standard firmware

 git clone https://github.com/gl-inet/glinet4.x.git

 ./scripts/gen_config.py target_wlan_ap-gl-ax1800 glinet_depends

 make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/ipq60xx/

5. Compile A1300(2023.02.22)

5.1 Compile A1300 OpenWrt firmware(No GL.iNet packages)

 git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder

 python3 setup.py -c configs/config-21.02.2.yml && cd openwrt-21.02/openwrt-21.02.2

 ./scripts/gen_config.py target_ipq40xx_gl-a1300 luci

 make V=s -j5

5.2 Compile A1300 GL.iNet standard firmware

 git clone https://github.com/gl-inet/glinet4.x.git

 ./scripts/gen_config.py target_ipq40xx_gl-a1300 glinet_depends

 make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/ipq40xx/

6. Compile SFT1200(2022.11.23)

 git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder

 python3 setup.py -c config-siflower-18.x.yml && cd openwrt-18.06/siflower/openwrt-18.06

 ./scripts/gen_config.py target_siflower_gl-sft1200 luci

 make V=s -j5

7. Compile S200(2023.02.24)

4.1 Compile S200 OpenWrt firmware(No GL.iNet packages)

 git clone https://github.com/gl-inet/gl-infra-builder.git && cd gl-infra-builder

 python3 setup.py -c configs/config-21.02.2.yml && cd openwrt-21.02/openwrt-21.02.2

 ./scripts/gen_config.py target_ath79_gl-s200 luci

 make V=s -j5

4.2 Compile S200 GL.iNet standard firmware

 git clone https://github.com/gl-inet/glinet4.x.git

 ./scripts/gen_config.py target_ath79_gl-s200 glinet_depends_s200

 make V=s -j5 GL_PKGDIR=`pwd`/glinet4.x/ath79/

Note

  1. If you gcc version is 10, you will encounter some error, like this:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error：ld returned 1 exit status.

You should execute the following command to reduce the gcc version:

$ update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-9 100
$ update-alternatives --config gcc