/Liquid-Crystal-I2C-Modified

#include <LiquidCrystal_I2C.h> #include <Wire.h> LiquidCrystal_I2C lcd(0x27, 16, 2); void setup() { Serial.begin(115200); lcd.begin(); } void loop() { lcd.clear(); lcd.setCursor(0,0); lcd.print("HALLO ^_^"); lcd.setCursor(0,1);lcd.print("IWAN CILIBUR"); delay(1000); }

Primary LanguageC++

Installation

Create a new folder called "LiquidCrystal_I2C" under the folder named "libraries" in your Arduino sketchbook folder. Create the folder "libraries" in case it does not exist yet. Place all the files in the "LiquidCrystal_I2C" folder.

Usage

To use the library in your own sketch, select it from Sketch > Import Library.

#include <LiquidCrystal_I2C.h> #include <Wire.h>

LiquidCrystal_I2C lcd(0x27, 16, 2);

void setup() { Serial.begin(115200); lcd.begin(); }

void loop() { lcd.clear(); lcd.setCursor(0,0); lcd.print("HALLO ^_^"); lcd.setCursor(0,1);lcd.print("IWAN CILIBUR"); delay(1000);

lcd.clear(); lcd.setCursor(0,0); lcd.print("HALLO ^_^"); lcd.setCursor(0,1);lcd.print("ROBOTIKA"); delay(1000); }