Issues
- 1
OBDII fault code names
#58 opened by arn-2469 - 3
Support for different control modules?
#17 opened by isage - 1
sharing of your OBD9141 project
#57 opened by aeonSolutions - 1
LiquidCrystal_I2C problem.
#56 opened by Vladislav-Lavrushkin - 3
The example for esp32 does not work.
#50 opened by Vladislav-Lavrushkin - 2
Usage with MCP2025
#55 opened by Dabi1127 - 1
mitisuibishi MUT 2 (kline 5 baud init)
#54 opened by professor-jonny - 3
None of the examples is working
#52 opened by fly2jerry - 8
PIDS
#51 opened by ClusterModzCo - 9
readerKWP not working for me
#32 opened by jwdsoft - 49
Questions and ISO 14230-2 KWP development
#11 opened by mjs513 - 5
Unable to initialize obd.init()
#49 opened by Ashok12698 - 2
KWP71 Compatibility
#48 opened by dimiras - 2
ESP32 Serial1 crash...
#47 opened by janokylaszlo - 6
- 19
esp32 with OBD9141 not work
#45 opened by taoloo897 - 18
k-line speed study
#40 opened by gauix4 - 5
How can I know if I'm doing everything right?
#44 opened by tzomats - 20
How to make it work....
#41 opened by SteveTinkers - 4
KWP Slow init with v1 != v2
#34 opened by tistructor - 14
- 3
- 7
ESP32 support
#35 opened by Gcopper22 - 0
missing Serial1 declaration
#33 opened by aniltg - 25
about kline
#30 opened by rubensx - 4
Slow init simulator code
#31 opened by bonadio - 4
How to tweak timing?
#2 opened by fightforlife - 1
why using digitalwrite(tx_pin,true)
#29 opened by TeensyDucM - 1
I need to add delay in between each PID request
#28 opened by Jonoox - 15
- 10
Chipkit Max32 with KWP FAST Protocol
#14 opened by zakirsheik - 1
Custom request, and recv full data message
#16 opened by Mebius84 - 11
I just discovered that I "reinvented" the wheel
#15 opened by aster94 - 0
KWP 2000 fast init
#5 opened by iwanders - 5
- 1
- 16
Mode 04 Clear Trouble Codes, CEL, MIL
#8 opened by crashmaxx - 38
Mode 0x03: Request trouble codes.
#9 opened by produmann - 4
What to do when it doesn't work immediately?
#3 opened by iwanders - 6
Arduino DUE functionality?
#4 opened by rocketjosh