/raspi-ctrl

Primary LanguageTypeScript

How to Install

  1. Write "Raspberry Pi OS Lite Legacy" image into your SD card by Raspberry Pi Imager
    • !!!raspi-ctrl must need leagcy version (Debian Buster)!!!
    • After install steps needs internet connection. So you should configure wifi settings on Raspberry Pi Imager before writing image.
    • And I reccomend to configure hostname and ssh settings too.
  2. Exec curl -sSL https://github.com/iwate/raspi-ctrl/raw/dev/setup1.sh | sudo bash on raspberry pi
    • After exec, it will reboot automaticaly.
  3. Exec curl -sSL https://github.com/iwate/raspi-ctrl/raw/dev/setup2.sh > /tmp/setup2.sh && sudo bash /tmp/setup2.sh on raspberry pi
    • After exec, it will reboot automaticaly.

How to Use

Turn off mobile network and private DNS and connect the SSID you setupped. Then access http://192.168.4.1 by web browser.