j-be/AutoBim

Issues

• Left Corner repeated probing Creality Ender 5 Plus

  #40 opened a year ago by ProtomakerSprint
  1

• Stuck on Wait..... Point X Y seems to be unreachable

  #39 opened a year ago by SoaringEagle93
  10

• Allow a timer inbetween probes

  #15 opened a year ago by eblieb
  14

• X and Y higher resolution and bed temp and nozzle temp upvote

  #38 opened a year ago by Omnipresent77
  1

• requested feature probing failed

  #37 opened a year ago by Diilandh
  7

• Stuck on "wait..."

  #35 opened 2 years ago by rayge99
  3

• Ender 3 S1 Pro Can't reach coordinates

  #36 opened 2 years ago by Ajiirtj
  2

• Inconsistent readings

  #32 opened 2 years ago by jrburris
  4

• Hotend does not move after 2nd point.

  #34 opened 2 years ago by RedBombX
  5

• Probe Deploy (M401) and Stow (M402)

  #33 opened 2 years ago by adsaxton
  13

• Feature Requests: Bed Heating and Auto Stop

  #31 opened 3 years ago by mlee12382
  4

• Look at the printers screen

  #21 opened 3 years ago by unitrix0
  5

• After probing the first corner the first time M112 emergency stop issued, same as stuck waiting?

  #30 opened 3 years ago by jbodhorn
  2

• Ender 3 S1

  #28 opened 3 years ago by paul-aviles
  6

• Does not complete check on Ender 3 Pro

  #11 opened 3 years ago by KalixtShawxo
  15

• G30 coordinates ignoring probe offset

  #25 opened 3 years ago by charredchar
  3

• Ender 3 Max - Point X30 Y300 seems to be unreachable!

  #26 opened 3 years ago by MrSignalPlus
  4

• 'ok. moving to next' on first probe point when disabling Mulitpass probing

  #27 opened 3 years ago by UnavengedAvo
  5

• [FR] LEVEL_CORNERS_USE_PROBE

  #3 opened 3 years ago by Guilouz
  6

• Starting z offset problem (maybe due to low center on bed)

  #13 opened 3 years ago by lnevo
  7

• Logic Issue

  #17 opened 3 years ago by eblieb
  2

• 3 Point leveling for Ender2

  #14 opened 3 years ago by togeis
  3

• repeated runs don't measure the same

  #23 opened 3 years ago by unitrix0
  3

• Cannot probe over adjustment knobs on ender 3 pro

  #24 opened 3 years ago by SpiderSpartan
  4

• Temperature reporting conflict.

  #20 opened 3 years ago by garciaramondallas
  5

• Add option to choose corner travel order

  #18 opened 3 years ago by lordekeen
  6

• Something weird is going on

  #16 opened 3 years ago by eblieb
  4

• Avoid scrolling text on LCD

  #12 opened 3 years ago by j-be
  0

• [FR] Custom @AUTOBIM GCode Command

  #10 opened 3 years ago by jneilliii
  1

• Stops at second point

  #9 opened 3 years ago by Xiondewah
  1

• Add wait time before moving to other corner

  #7 opened 3 years ago by MirekStanek
  2

• Where is the button / screen?

  #8 opened 3 years ago by HeMaN-NL
  3

• Add button to execute an M48 - Probe Accuracy Test and use it to validate accuracy

  #1 opened 4 years ago by j-be
  1

• Cannot get Z for corner

  #6 opened 3 years ago by MirekStanek
  9

• UBL - G29 P0 is the wrong command

  #5 opened 3 years ago by luketot
  1

• UBL causes 3-point leveling at start of tramming

  #4 opened 3 years ago by Fury1SOG
  7

• Add a button to settings allowing to validate the corner points

  #2 opened 4 years ago by j-be
  0