Pinned Repositories
AES
AES for microcontrollers (Arduino & Raspberry pi)
AES32
Hardware accelerated AES Encryption for ESP32
AltSoftSerial
Software emulated serial using hardware timers for improved compatibility
arduino-ad-mux-lib
Arduino library for controlling analog/digital multiplexers (A/D mux)
arduino-esp32
Arduino core for the ESP32
arduino-mcp2515
Arduino MCP2515 CAN interface library
ArduinoARPspoof
Kicks out everyone in your LAN via with an enc28j60 ethernet controller and Arduino.
ArduinoCore-avr
The Official Arduino AVR core
arduinolibs
Arduino Cryptography Library
atmega328p-serial-uart-to-pc-communication
Atmega328p sample codes for USART (transmission and reception) communication with a Linux/Windows PC
j-p-f-f's Repositories
j-p-f-f/arduino-esp32
Arduino core for the ESP32
j-p-f-f/arduino-mcp2515
Arduino MCP2515 CAN interface library
j-p-f-f/ArduinoCore-avr
The Official Arduino AVR core
j-p-f-f/BCN3D-Moveo
Open Source 3D Printed Robotic Arm for educational purposes
j-p-f-f/CANable-MKS
j-p-f-f/circle
A C++ bare metal environment for Raspberry Pi with USB (32 and 64 bit)
j-p-f-f/diyBMSv4
Version 4 of the diyBMS
j-p-f-f/drlut
Online DSP Lookup Table Generator. (AKA: Sine wave LUT calculator)
j-p-f-f/Embedded_RingBuf_CPP
A simple C++ Ring (Circular) Buffer Queuing Library for Programming with Arduino's and other Embedded platforms
j-p-f-f/esp-mqtt
ESP32 mqtt component
j-p-f-f/FlexCAN_T4
FlexCAN (CAN 2.0 / CANFD) Library for Teensy 3.x and 4.0
j-p-f-f/LCR_meter
LCR meter. Inductance, Capacitance and Resistance meter, Arduino NANO (version 3) based. 4 resistor test ranges, Resistor range is from 0 ohms to 2 Mohms. Auto-range. Inductance test, range is 80uH to 30,000uH. Capacitance three tests , range 18pf to 4F. Outputs data to serial monitor and LCD 16x02.
j-p-f-f/LoRa_E32_Series_Library
Arduino LoRa EBYTE E32 device library complete and tested with Arduino, esp8266 and esp32. sx1278/sx1276
j-p-f-f/mbedtls
An open source, portable, easy to use, readable and flexible SSL library
j-p-f-f/MCP_CAN_lib
MCP_CAN Library
j-p-f-f/MOTUS
Open-Source 3D Printed Robot Arm with 6-DoF created by ELISAVA Development Lab
j-p-f-f/OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA.
j-p-f-f/openvpn-install
OpenVPN road warrior installer for Ubuntu, Debian, AlmaLinux, Rocky Linux, CentOS and Fedora
j-p-f-f/qtmqtt
Qt Module to implement MQTT protocol version 3.1 and 3.1.1 http://mqtt.org/
j-p-f-f/raspi3-tutorial
Bare metal Raspberry Pi 3 tutorials
j-p-f-f/razor_imu_9dof
A ROS driver and firmware to connect to Sparkfun OpenLog Artemis, 9DoF Razor IMU M0, 9DOF Razor IMU and 9DOF Sensor Stick. These boards consists of 3 sensors: magnetic, gyro and acceleration sensor.
j-p-f-f/Seeed_Arduino_CAN
Seeed Arduino CAN-BUS library - MCP2518FD&MCP2515&MCP2551
j-p-f-f/Seeed_Arduino_FS
This library is for the file operation. To install FAT file systems at SD card and flash. Gives an example to read and write an SD card.
j-p-f-f/serial-atmega
Serial communication with Atmega328p/Arduino Uno
j-p-f-f/SWTG
Sine Wave Table Generator
j-p-f-f/TMCStepper
j-p-f-f/udp-socket
Simple QUdpSocket
j-p-f-f/UIPEthernet
UIPEthernet library for Arduino IDE,Eclipse with arduino plugin and MBED/SMeshStudio (AVR,STM32F,ESP8266,Intel ARC32, Nordic nRF51, Teensy boards,Realtek Ameba(RTL8195A,RTL8710)), ENC28j60 network chip. Compatible with Wiznet W5100 Ethernet library API.
j-p-f-f/vl53l1x_ros
STM VL53L1X rangefinder driver for ROS
j-p-f-f/wireguard-install
WireGuard road warrior installer for Ubuntu, Debian, AlmaLinux, Rocky Linux, CentOS and Fedora