This project is looking for maintainers, see also jenkinsci#200 If you want to adopt this plugin see https://www.jenkins.io/doc/developer/plugin-governance/adopt-a-plugin/
This Jenkins plugin uses Amazon Elastic Container Service to host jobs execution inside docker containers.
Jenkins delegates to Amazon ECS the execution of the builds on Docker based agents. Each Jenkins build is executed on a dedicated Docker container that is wiped-out at the end of the build.
- use GitHub Issues to report issues / feature requests
The scope of the plugin is only using existing and pre-configured AWS Infrastructure. It does not create any of the needed infrastructure on its own. Use tools like CloudFormation or Terraform for this task.
- Jenkins with at least version 2.176.1
- AWS Account
Use the Jenkins plugin manager to install the Amazon Elastic Container Service plugin
There are currently the following example setups (also in this repo):
- Fargate - ephemeral master and agents on Fargate
- Fargate with CDK (by AWS) - Jenkins Setup designed by AWS
As a pre-requisite, you must have created an Amazon ECS cluster with associated ECS instances. These instances can be statically associated with the ECS cluster or can be dynamically created with Amazon Auto Scaling.
The Jenkins Amazon EC2 Container Service plugin will use this ECS cluster and will create automatically the required Task Definition.
Navigate to the "Configure System" screen.
In the "Jenkins Location" section, ensure that the "Jenkins URL" is reachable from the the container instances of the Amazon ECS cluster. See the section "Network and firewalls" for more details.
If the global Jenkins URL configuration does not fit your needs (e.g. if your ECS agents must reach Jenkins through some kind of tunnel) you can also override the Jenkins URL in the Advanced Configuration of the ECS cloud.
At the bottom of the screen, click on "Add a new Cloud" and select "Amazon EC2 Container Service Cloud".
Then enter the configuration details of the Amazon EC2 Container Service Cloud:
Name: name for your ECS cloud (e.g.ecs-cloud)Amazon ECS Credentials: Amazon IAM Access Key with privileges to create Task Definitions and Tasks on the desired ECS clusterECS Cluster: desired ECS cluster on which Jenkins will send builds as ECS tasksECS Template: click on "Add" to create the desired ECS template or templates
Advanced configuration
Tunnel connection through: tunnelling options (when Jenkins runs behind a load balancer).
Alternative Jenkins URL: The URL used as the Jenkins URL within the ECS containers of the configured cloud. Can be used to override the default Jenkins URL from global configuration if needed.
One or several ECS agent templates can be defined for the Amazon EC2 Container Service Cloud. The main reason to create more than one ECS agent template is to use several Docker image to perform build (e.g. java-build-tools, php-build-tools...)
Template nameis used (prefixed with the cloud's name) for the task definition in ECS.Label: agent labels used in conjunction with the job level configuration "Restrict where the project can be run / Label expression". ECS agent label could identify the Docker image used for the agent (e.g.dockerfor the jenkinsci/inbound-agent).Docker image: identifier of the Docker image to use to create the agentsFilesystem root: working directory used by Jenkins (e.g./home/jenkins/).Memory: number of MiB of memory reserved for the container. If your container attempts to exceed the memory allocated here, the container is killed.- The number of
cpu unitsto reserve for the container. A container instance has 1,024 cpu units for every CPU core. Advanced Configuration
Override entrypoint: overwritten Docker image entrypoint. Container command can't be overriden as it is used to pass jenkins agent connection parameters.JVM arguments: additional arguments for the JVM, such as-XX:MaxPermSizeor GC options.
Running the Jenkins master and the ECS container instances in the same Amazon VPC and in the same subnet is the simplest setup and default settings will work out-of-the-box.
Firewalls If you enable network restrictions between the Jenkins master and the ECS cluster container instances,
Fix the TCP listen port for JNLP agents of the Jenkins master (e.g. 5000) navigating in the "Manage Jenkins / Configure Global Security" screen
Allow TCP traffic from the ECS cluster container instances to the Jenkins master on the listen port for JNLP agents (see above) and the HTTP(S) port.
Network Address Translation and Reverse Proxies In case of Network Address Translation rules between the ECS cluster container instances and the Jenkins master, ensure that the JNLP agents will use the proper hostname to connect to the Jenkins master doing on of the following:
Define the proper hostname of the Jenkins master defining the system property hudson.TcpSlaveAgentListener.hostName in the launch command
Use the advanced configuration option "Tunnel connection through" in the configuration of the Jenkins Amazon EC2 Container Service Cloud (see above).
To work the plugin needs some IAM permissions. Assign a role with those permissions to the instance / container you are running the master on.
Here is an example of a role in CloudFormation, make sure to modify it for your needs.
TaskRole:
Type: AWS::IAM::Role
Properties:
RoleName: !Sub ${AWS::StackName}-task-role
Path: /
AssumeRolePolicyDocument:
Version: 2012-10-17
Statement:
- Effect: Allow
Principal:
Service:
- ecs-tasks.amazonaws.com
Action: sts:AssumeRole
Policies:
- PolicyName: !Sub ecs-${AWS::StackName}
PolicyDocument:
Version: "2012-10-17"
Statement:
- Action:
- "ecs:RegisterTaskDefinition"
- "ecs:ListClusters"
- "ecs:DescribeContainerInstances"
- "ecs:ListTaskDefinitions"
- "ecs:DescribeTaskDefinition"
- "ecs:DeregisterTaskDefinition"
Effect: Allow
Resource: "*"
- Action:
- "ecs:ListContainerInstances"
Effect: Allow
Resource:
- !Sub "arn:aws:ecs:${AWS::Region}:${AWS::AccountId}:cluster/<clusterName>"
- Action:
- "ecs:RunTask"
Effect: Allow
Condition:
ArnEquals:
ecs:cluster:
- !Sub "arn:aws:ecs:${AWS::Region}:${AWS::AccountId}:cluster/<clusterName>"
Resource: !Sub "arn:aws:ecs:${AWS::Region}:${AWS::AccountId}:task-definition/*"
- Action:
- "ecs:StopTask"
Effect: Allow
Condition:
ArnEquals:
ecs:cluster:
- !Sub "arn:aws:ecs:${AWS::Region}:${AWS::AccountId}:cluster/<clusterName>"
Resource: !Sub "arn:aws:ecs:*:*:task/*" # "arn:aws:ecs:${AWS::Region}:${AWS::AccountId}:task/*"
- Action:
- "ecs:DescribeTasks"
Effect: Allow
Condition:
ArnEquals:
ecs:cluster:
- !Sub "arn:aws:ecs:${AWS::Region}:${AWS::AccountId}:cluster/<clusterName>"
Resource: !Sub "arn:aws:ecs:*:*:task/*" # "arn:aws:ecs:${AWS::Region}:${AWS::AccountId}:task/*"The Jenkins Amazon EC2 Container Service Cloud can use for the agents all the Docker image designed to act as a Jenkins JNLP agent. Here is a list of compatible Docker images:
You can easily extend the images or also build your own.
Declarative Pipeline support requires Jenkins 2.66+
Declarative agents can be defined like shown below. You can also reuse pre-configured templates and override certain settings using inheritFrom to reference the Label field
of the template that you want to use as preconfigured. Only one label is expected to be specified.
When using inheritFrom, the label will not copied. Instead, a new label will be generated based on the following schema {job-name}-{job-run-number}-{5-random-chars} e.g. "pylint-543-b4f42". This guarantees that there will not be conflicts with the parent template or other runs of the same job, as well as making it easier to identify the labels in Jenkins.
If you want to override the label, ensure that you are not going to conflict with other labels configured elsewhere. Templates for dynamic agents exist until the agent dies, meaning other jobs requesting the same label (including dynamic agents on other runs of the same job!) run the chance of provisioning the dynamic agent's ECSTask.
Note: You have to configure list of settings to be allowed in the declarative pipeline first (see the Allowed Overrides setting). They are disabled by default for security reasons, to avoid non-privileged users to suddenly be able to change certain settings.
If Jenkins is unexpectedly shut down there is a good chance that ECS Tasks for dynamic agents will not be cleaned up (de-registered) in AWS. This should not cause issues, but may come as a surprise when looking at the console.
The ECS agents can be used for any job and any type of job (Freestyle job, Maven job, Workflow job...), you just have to restrict the execution of the jobs on one of the labels used in the ECS Agent Template configuration. You can either restrict the job to run on a specific label only via the UI or directly in the pipeline.
pipeline {
agent none
stages {
stage('PublishAndTests') {
environment {
STAGE='prod'
}
agent {
label 'build-python36'
}
}
steps {
sh 'java -version'
}
}
}pipeline {
agent none
stages {
stage('Test') {
agent {
ecs {
inheritFrom 'label-of-my-preconfigured-template'
cpu 2048
memory 4096
image '$AWS_ACCOUNT.dkr.ecr.$AWS_REGION.amazonaws.com/jenkins/java8:2019.7.29-1'
logDriver 'fluentd'
logDriverOptions([[name: 'foo', value:'bar'], [name: 'bar', value: 'foo']])
portMappings([[containerPort: 22, hostPort: 22, protocol: 'tcp'], [containerPort: 443, hostPort: 443, protocol: 'tcp']])
}
}
steps {
sh 'echo hello'
}
}
}
}Scripted Pipeline examples
def dynamic_label = "${JOB_NAME}_${env.sha}"
ecsTaskTemplate(
cloud: 'CloudNameAsConfiguredInManageClouds',
label: dynamic_label,
name: dynamic_label, // Reusing the label as a name makes sense as long as it's unique
containerUser: 'ubuntu',
remoteFSRoot: '/home/ubuntu',
overrides: [],
taskDefinitionOverride: "arn:aws:redacted:redacted:task-definition/${env.task}"
) {
node(dynamic_label) {
stage("I dunno why you say goodbye"){
sh 'echo hello'
}
}
}pipeline{
agent {
ecs {
inheritFrom 'ecs_test'
cpu 1000
}
}
stages{
stage("Here goes nothin"){
sh 'echo hello'
}
}
}Actually, there can be multiple reasons:
-
The plugin creates a new agent only when the stage contains an
agentdefinition. If this is missing, the stage inherits the agent definition from the level above and also re-uses the instance. -
Also, parallel stages sometimes don't really start at the same time. Especially, when the provided label of the
agentdefinition is the same. The reason is that Jenkins tries to guess how many instances are really needed and tells the plugin to start n instances of the agent with label x. This number is likely smaller than the number of parallel stages that you've declared in your Jenkinsfile. Jenkins calls the ECS plugin multiple times to get the total number of agents running. -
If launching of the agents takes long, and Jenkins calls the plugin in the meantime again to start n instances, the ECS plugin doesn't know if this instances are really needed or just requested because of the slow start. That's why the ECS plugin subtracts the number of launching agents from the number of requested agents (for a specific label). This can mean for parallel stages that some of the agents are launched after the previous bunch of agents becomes online.
There are options that influence how Jenkins spawns new Agents. You can set for example on your master the following to improve the launch times:
-Dhudson.slaves.NodeProvisioner.initialDelay=0 -Dhudson.slaves.NodeProvisioner.MARGIN=50 -Dhudson.slaves.NodeProvisioner.MARGIN0=0.85If you are running a interesting setup or have public posts abour your setups using this plugins, please file a PR to get it added here.
- Slides: Run Jenkins as managed product on ECS
- Youtube: Jenkins with Amazon ECS slaves
- AWS Blog - Jenkins on AWS
Andreas Sieferlinger (GitHub Twitter)
Philipp Garbe (GitHub, Twitter)
Marky Jackson (GitHub, Twitter)
java -version # Need Java 1.8, earlier versions are unsupported for build
mvn -version # Need a modern maven version; maven 3.2.5 and 3.5.0 are known to work
mvn clean installTo run locally, execute the following command and open the browser http://localhost:8080/jenkins/
mvn -e hpi:runthe
@Rule
public JenkinsRule j = new JenkinsRule();Will actually invoke code that will bootstrap a local installation of jenkins.war. This will allow you to debug with with breakpoints and such. However, to do it
you will need to set some system properties or be aware how it tries to auto-configure. It will attempt to look for a .jenkins directory recursively with an already exploded war,
So, theoretically you explode it, and git ignore it, right in this space. Alternatively, you can set a System property:
-Djth.jenkins-war.path=${PATH}/jenkins.war
Make sure to include this rule in any tests that touch Jenkins specific resources like: Jenkins.instance()
mvn clean release:prepare release:performCheck for additional or forgotten dependencies:
mvn dependency:analyzeCheck if javadoc works fine (usually only executed on release)
mvn org.apache.maven.plugins:maven-javadoc-plugin:2.10.4:jar