Why should I care?

RPC is the underlying mechanism which is used for numerous lateral movement techniques, reconnaisense, relay attacks, or simply to exploit vulnerable RPC services.

DCSync attack? over RPC. Remote DCOM? over RPC. WMIC? over RPC. SharpHound? over RPC. PetitPotam? over RPC. PsExec? over RPC. ZeroLogon? over RPC... well, you get the idea :)

What is it used for?

Research

Install the RPC Firewall and configure it to audit all remote RPC calls. Once executing any remote attack tools, you will see which RPC UUIDs and Opnums were called remotely.

Remote RPC Attacks Detection

When the RPC Firewall is configured to audit, it write events to the Windows Event Log.

Forward this log to your SIEM, and use it to create baselines of remote RPC traffic for your servers.

Once an abnormal RPC call is audited, use it to trigger an alert for your SOC team.

Remote RPC Attacks Protection

The RPC Firewall can be configured to block & audit only potentially malicious RPC calls. All other RPC calls are not audited to reduce noise and improve performance.

Once a potentially malicious RPC call is detected, it is blocked and audited. This could be used to alert your SOC team, while keeping your servers protected.

What are the RPC Firewall Components?

It is made up from 3 components:

RpcFwManager.exe - In charge of managing the RPC Firewall.
RpcFirewall.dll - Injected DLL which performs the audit & filtering of RPC calls.
RpcMessages.dll - A common library for sharing functions, and logic that writes data into Windows Event Viewer.

How to use?

Installing / Uninstalling

Installation simply drops the RPC Firewall DLLs into the %SystemRoot%\System32, and configures the RPCFWP application log for the Event Viewer.

RpcFwManager.exe /install

Uninstalling does the opposite.

RpcFwManager.exe /uninstall

Protecting Process(es)

The RpcFwManager tried to inject the rpcFirewall.dll only to processes which have the RPCRT4.DLL loaded into them.

Once the rpcFirewall.dll is loaded, it verifies that the host process has a valid RPC interface, and is listening for remote connections.

Otherwise, the rpcFirewall.dll unloaded itself from the target process.

If the process is a valid RPC server, the rpcFirewall starts to audit & monitor incoming RPC calls, according to the configuration file.

To protect a single process by pid:

RpcFwManager.exe /pid <pid>

To protect a single process by name:

RpcFwManager.exe /process <process name>

To protect all process, simply leave the or parametes blank.

RpcFwManager.exe /process
RpcFwManager.exe /pid

Unprotecting Processes

To disable the RPC Firewall, either uninstall it, or use the unprotect parameter:

RpcFwManager.exe /unprotect

This will unload the rpcFirewall.dll from all processes.

Configuration

The rpcFwManager.exe looks for a RpcFw.conf file, in the same directory of the executable. This file uses the following configuration options:

uuid -> match a specific uuid
opnum -> match a RPC opnum
addr -> match a remote IP address
action -> can be either allow or block (default allow)
audit -> true or false, controls whether events are written to the RPCFWP log (default false)
verbose -> when true, outputs debug informaiton for specific RPC calls (default false)

The configuration order is important, as the first match determines the outcome of the RPC call.

For example, the following configuration will protect a DC from a DCSync attack by disabling the MS-DRSR UUID from non-domain machines. Also, notice that audit is enabled only for blocked MS-DRSR attempts, which could alert your SOC to a potential attack!

uuid:e3514235-4b06-11d1-ab04-00c04fc2dcd2 addr:<dc_addr1> action:allow
uuid:e3514235-4b06-11d1-ab04-00c04fc2dcd2 addr:<dc_addr2> action:allow
uuid:e3514235-4b06-11d1-ab04-00c04fc2dcd2 action:block audit:true

Whenever the configuration changes, you need to notify the rpcFirewall.dll via the update command:

RpcFwManager.exe /update

Can I Contribute?

Yes! Don't be shy to do a pull request.

I want RPC Firewall to do more things!

We want this also! please reach out to us with any thoughts, ideas or issues you are having: support@zeronetworks.com

Is there a License?

For more details see LICENSE.

jack51706/rpcfirewall