jackmitch/libsoc

Issues

• pwm device on new kernel

  #97 opened 5 years ago by gkarsai
  1

• Libsoc issue during running C program

  #104 opened 5 years ago by gaston371
  6

• error: redefinition of i2c stuff between /usr/include/linux/i2c.h and /usr/include/linux/i2c-dev.h

  #96 opened 6 years ago by dglaude
  2

• GPIO default on system load?

  #94 opened 6 years ago by ndvbd
  3

• The make install requires sudo

  #91 opened 7 years ago by ndvbd
  3

• SystemError: initialization of _libsoc raised unreported exception

  #89 opened 7 years ago by jflorian
  9

• Segmentation fault

  #85 opened 7 years ago by felipexlr50
  6

• Syntax error when running "./configure"

  #61 opened 8 years ago by nkolban
  7

• add support for SPI bit ordering

  #76 opened 7 years ago by cyboflash
  3

• python and gpio_test.py

  #73 opened 7 years ago by rbmistry
  5

• disable debug

  #84 opened 7 years ago by jcomeauictx
  2

• add support for i2c restart condition

  #75 opened 7 years ago by cyboflash
  2

• multiple definitions of enum *mode* in gpio and pwm libs

  #77 opened 7 years ago by bhuvanchandra
  2

• Add support for new kernel GPIO API (linux >= 4.7)

  #72 opened 8 years ago by yegorich
  0

• SPI - 16-bit Mode

  #9 opened 8 years ago by compiaffe
  14

• Python bindings for SPI

  #41 opened 8 years ago by ukBaz
  2

• i2c: implement register access

  #14 opened 10 years ago by yegorich
  6

• Change in spi.c

  #63 opened 8 years ago by LiveWang
  1

• libsoc_gpio.h depends on stdlib.h

  #62 opened 8 years ago by nkolban
  1

• Python: add set_edge function

  #49 opened 8 years ago by ukBaz
  3

• Create new release

  #53 opened 8 years ago by ukBaz
  2

• gpio: return correct return value for libsoc_gpio_wait_interrupt()

  #17 opened 8 years ago by yegorich
  1

• make giving error when building with Python

  #39 opened 8 years ago by ukBaz
  9

• Python: request_gpios gives error if only one pin specified

  #50 opened 8 years ago by ukBaz
  6

• Can wait_for_interrupt wait indefinitely

  #48 opened 8 years ago by ukBaz
  5

• gpio: need libsoc_gpio_wait_change() libsoc_gpio_callback_change() for devices that don't support interrupts

  #23 opened 8 years ago by brunnels
  2

• gpio: make libsoc_gpio_wait_interrupt() to wait for multiple inputs

  #18 opened 10 years ago by yegorich
  0

• Simple python example to blink LED not working

  #40 opened 9 years ago by ukBaz
  2

• configure is broken when building out of the project tree

  #34 opened 9 years ago by ldts
  2

• error in configure after running autogen.sh

  #27 opened 9 years ago by waldo323
  15

• cross compilation

  #29 opened 9 years ago by abebech
  9

• libsoc_gpio_set_edge(gpio_input, BOTH) tried to set edge to "in"

  #22 opened 10 years ago by MarkAYoder
  3

• non root access to spidev and gpio

  #19 opened 10 years ago by compiaffe
  5