This plugin is a repackaging of Mislav Marohnić's tmux-navigator configuration described in this gist. When combined with a set of tmux key bindings, the plugin will allow you to navigate seamlessly between vim and tmux splits using a consistent set of hotkeys.
NOTE: This requires tmux v1.8 or higher.
This plugin provides the following mappings which allow you to move between Vim panes and tmux splits seamlessly.
<ctrl-h>=> Left<ctrl-j>=> Down<ctrl-k>=> Up<ctrl-l>=> Right<ctrl-\>=> Previous split
Note - you don't need to use your tmux prefix key sequence before using
the mappings.
If you want to use alternate key mappings, see the configuration section below.
If you don't have a preferred installation method, I recommend using Vundle. Assuming you have Vundle installed and configured, the following steps will install the plugin:
Add the following line to your ~/.vimrc file
Bundle 'christoomey/vim-tmux-navigator'Add the following to your tmux.conf file to configure the tmux side of
this customization.
# Smart pane switching with awareness of vim splits
is_vim='echo "#{pane_current_command}" | grep -iqE "(^|\/)g?(view|n?vim?)(diff)?$"'
bind -n C-h if-shell "$is_vim" "send-keys C-h" "select-pane -L"
bind -n C-j if-shell "$is_vim" "send-keys C-j" "select-pane -D"
bind -n C-k if-shell "$is_vim" "send-keys C-k" "select-pane -U"
bind -n C-l if-shell "$is_vim" "send-keys C-l" "select-pane -R"
bind -n C-\ if-shell "$is_vim" "send-keys C-\\" "select-pane -l"Thanks to Christopher Sexton who provided the updated tmux configuration in this blog post.
If you don't want the plugin to create any mappings, you can use the five
provided functions to define your own custom maps. You will need to define
custom mappings in your ~/.vimrc as well as update the bindings in tmux to
match.
Add the following to your ~/.vimrc to define your custom maps:
let g:tmux_navigator_no_mappings = 1
nnoremap <silent> {Left-mapping} :TmuxNavigateLeft<cr>
nnoremap <silent> {Down-Mapping} :TmuxNavigateDown<cr>
nnoremap <silent> {Up-Mapping} :TmuxNavigateUp<cr>
nnoremap <silent> {Right-Mapping} :TmuxNavigateRight<cr>
nnoremap <silent> {Previous-Mapping} :TmuxNavigatePrevious<cr>Note Each instance of {Left-Mapping} or {Down-Mapping} must be replaced
in the above code with the desired mapping. Ie, the mapping for <ctrl-h> =>
Left would be created with nnoremap <silent> <c-h> :TmuxNavigateLeft<cr>.
let g:tmux_navigator_save_on_switch = 1
This will execute the update command on leaving vim to a tmux pane. Default is Zero
Alter each of the five lines of the tmux configuration listed above to use your custom mappings. Note each line contains two references to the desired mapping.
The default key bindings include <Ctrl-l> which is the readline key binding
for clearing the screen. The following binding can be added to your ~/.tmux.conf file to provide an alternate mapping to clear-screen.
bind C-l send-keys 'C-l'With this enabled you can use <prefix> C-l to clear the screen.
Thanks to Brian Hogan for the tip on how to re-map the clear screen binding.
If you like to nest your tmux sessions, this plugin is not going to work properly. It probably never will, as it would require detecting when Tmux would wrap from one outermost pane to another and propagating that to the outer session.
By default this plugin works on the outermost tmux session and the vim sessions it contains, but you can customize the behaviour by adding more commands to the expression used by the grep command.
When nesting tmux sessions via ssh or mosh, you could extend it to look like
'(^|\/)g?(view|vim|ssh|mosh?)(diff)?$', which makes this plugin work within
the innermost tmux session and the vim sessions within that one. This works
better than the default behaviour if you use the outer Tmux sessions as relays
to different hosts and have all instances of vim on remote hosts.
Similarly, if you like to nest tmux locally, add |tmux to the expression.
This behaviour means that you can't leave the innermost session with Ctrl-hjkl
directly. These following fallback mappings can be targeted to the right Tmux
session by escaping the prefix (Tmux' send-prefix command).
bind -r C-h run "tmux select-pane -L"
bind -r C-j run "tmux select-pane -D"
bind -r C-k run "tmux select-pane -U"
bind -r C-l run "tmux select-pane -R"
bind -r C-\ run "tmux select-pane -l"This is likely due to conflicting key mappings in your ~/.vimrc. You can use
the following search pattern to find conflicting mappings
\vn(nore)?map\s+\<c-[hjkl]\>. Any matching lines should be deleted or
altered to avoid conflicting with the mappings from the plugin.
Another option is that the pattern matching included in the .tmux.conf is
not recognizing that Vim is active. To check that tmux is properly recognizing
Vim, use the provided Vim command :TmuxPaneCurrentCommand. The output of
that command should be a string like 'vim', 'Vim', 'vimdiff', etc. If you
encounter a different output please open an issue with as much info about
your OS, Vim version, and tmux version as possible.
This functionality requires tmux version 1.8 or higher. You can check your version to confirm with this shell command:
tmux -V # should return 'tmux 1.8'tmate is a tmux fork that aids in setting up remote pair programming sessions. It is designed to run alongside tmux without issue, but occasionally there are hiccups. Specifically, if the versions of tmux and tmate don't match, you can have issues. See this issue for more detail.
The tmux configuration uses an inlined grep pattern match to help determine if the current pane is running Vim. If you run into any issues with the navigation not happening as expected, you can try using Mislav's original external script which has a more robust check.