jagheterfredrik/esphome-rego1000

Issues

• Bootloop expected when not connected to CAN?

  #24 opened 5 months ago by jappish84
  4

• Align with 2024.06 OTA config

  #22 opened 5 months ago by gunstr
  1

• Canbus adresser

  #21 opened a year ago by Heativt
  9

• 3 way valve gone missing in esphome 2023.12.1

  #20 opened a year ago by patwes
  2

• Heating setpoint maxes out at night

  #17 opened a year ago by ksahlen
  10

• Install fails on any board

  #15 opened a year ago by ksahlen
  3

• indoor temperature is NaN

  #14 opened a year ago by pirateroad
  11

• Request - Possible to make "Holiday mode" work?

  #12 opened 2 years ago by stomko11
  5

• Dump values using CAN module MCP2515

  #10 opened 2 years ago by stomko11
  15

• possible error at editing file rego 1000.yaml

  #9 opened 2 years ago by pirateroad
  3

• Wrong data from rego1000 V3.6.0

  #6 opened 2 years ago by ReadyToExplode
  7

• Help request: register to write to set the indoor temperature on rego 1000 v3.6?

  #5 opened 2 years ago by davidbbs
  30

• [E][RegoReader:231]: Expected DLC of 2 for 0x0CBD3FE0, got 1

  #1 opened 2 years ago by cjonhammar
  5