Programming and charging dock for the ZSWatch.
Please check the wiki for more information about the project.
The dock can be used with an integrated Segger J-Link debugger or with an external Serial Wire Debugger (SWD) with an 10-pol ARM Cortex JTAG SWD connector.
The pinout for the dock connector is shown below.
| Pin | Description | |
|---|---|---|
 |
1 | VBUS (+5 V) |
| 2 | GND | |
| 3 | SEL | |
| 4 | D- / SWDIO | |
| 5 | D+ / SWDCLK |
| SEL | Function |
|---|---|
LOW |
USB |
HIGH |
SWD (Default) |
cad: 3D model of the complete PCBdocs: All kind of project documentationproject: KiCad project for the PCB
Please open ZSWatch-Dock-navigate.html and use the files listed under purchasing for ordering a PCB.