Connecting USB HUB
- Connect HUB data line to RPi USB port to make RPi master
- Connect HUB USB port to RPi micro usb to power RPi
See:
- https://raspberrypi.stackexchange.com/questions/57606/raspberry-pi-zero-refuses-to-detect-usb-hub-tried-multiple-hubs
- https://raspberrypi.stackexchange.com/questions/57014/does-a-usb-hub-work-with-raspberry-pi-zero
Samba
sudo apt-get install samba
Modify /etc/samba/smb.conf
Add system user and samba user
adduser joe
smbpasswd -a joe
See:
Check status with:
smbstatus
Peripherals
For gpio command:
sudo apt-get install wiringpi
Volumes, USB drives
USB drive
sudo apt-get install lshw
lsblk -a
lsusb
sudo lshw | less
sudo mkdir /media/usbdrive_primary
Mounting
sudo mount -t auto /dev/sda1 /media/usb1/
fstab description in
man 8 mount
Allow any user to mount fs:
% /etc/fstab
/dev/sda1 /media/usb1 auto uid=1000,gid=1000,user,rw 0 0
NOTE: adding this to fstab will cause the volume to mount on startup, but when it is not there (i.e. it is uplugged) RPi will compain and fail to boot.