jankae/LibreCAL

Issues

• Expensive SMA connectors

  #16 opened 2 months ago by sebgus
  2

• LibreCAL EmbeddedFirmware USB issue with pico-sdk 1.5 (LibreCAL-GUI impossible to connect)

  #11 opened 2 months ago by bvernoux
  7

• GCPW dimensions don't match the net class specs due to zone clearance

  #21 opened 10 months ago by miek
  2

• Question about low frequency performance of the PE426462

  #20 opened 10 months ago by miek
  4

• Transparent Emulation mode for common commercial e-Cal

  #19 opened a year ago by bvernoux
  1

• LibreCAL USB VID/PID not official

  #12 opened 2 years ago by bvernoux
  3

• Add SCPI command to READ/WRITE Date & Time

  #9 opened 2 years ago by bvernoux
  3

• LibreCAL Embedded Firmware improvement limit calibration points per file

  #14 opened 2 years ago by bvernoux
  2

• LibreCAL-GUI Coefficient -> Load From Device crash at end

  #17 opened 2 years ago by bvernoux
  2

• Add SCPI command to add COEFFICIENT comment(s)

  #10 opened 2 years ago by bvernoux
  4

• Update LibreCAL-GUI & firmware version to v0.1.1

  #7 opened 2 years ago by bvernoux
  1

• SCPI API comments

  #6 opened 2 years ago by miek
  3

• Is it possible to make a duplicate firmware for LibreCal in case of replacing pe426462 with pe42482?

  #5 opened 2 years ago by YuryW
  2

• Log RF switch cycle count

  #3 opened 2 years ago by bvernoux
  3

• Questions about Manual control use case with Port Select Port1/2/3/4 & Function Select Through

  #4 opened 2 years ago by bvernoux
  2