Pinned Repositories
dpd_sample_selection
Digital predistortion with sample selection methods.
comparator_dpd
Adaptation of a predistorter (DPD) to linarize a power amplifier (PA) with a comparator in the feedback, based on the direct learning architecture (DLA).
fract_tsync
Analytical method for fractional sample period time synchronisation in frequency domain for digital predistortion systems
dpd_bw_analysis
Evaluation of bandwidth influence on DPD linearisation quality
rfm_ila
Matlab source codes to supplement our research paper Digital Predistorter with Real-Valued Feedback Employing Forward Model Estimation
testing
testing repository how github is used, nothing really interesting
emco_usbhv
EMCO USB High Voltage Power Supply Control via Python and HID driver - no external libraries required
FPGA-USB-Device
An FPGA-based USB full-speed device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB full-speed device端控制器，可实现USB串口、USB摄像头、USB音频、U盘、USB键盘等设备，只需要3个FPGA普通IO，而不需要额外的接口芯片。
goexpect
Expect for Go
lorawan-parser
a parser of LoRaWAN PHY payload for Python3
jankralx's Repositories
jankralx/dpd_sample_selection
Digital predistortion with sample selection methods.
jankralx/comparator_dpd
Adaptation of a predistorter (DPD) to linarize a power amplifier (PA) with a comparator in the feedback, based on the direct learning architecture (DLA).
jankralx/fract_tsync
Analytical method for fractional sample period time synchronisation in frequency domain for digital predistortion systems
jankralx/dpd_bw_analysis
Evaluation of bandwidth influence on DPD linearisation quality
jankralx/rfm_ila
Matlab source codes to supplement our research paper Digital Predistorter with Real-Valued Feedback Employing Forward Model Estimation
jankralx/testing
testing repository how github is used, nothing really interesting
jankralx/emco_usbhv
EMCO USB High Voltage Power Supply Control via Python and HID driver - no external libraries required
jankralx/FPGA-USB-Device
An FPGA-based USB full-speed device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB full-speed device端控制器，可实现USB串口、USB摄像头、USB音频、U盘、USB键盘等设备，只需要3个FPGA普通IO，而不需要额外的接口芯片。
jankralx/goexpect
Expect for Go
jankralx/lorawan-parser
a parser of LoRaWAN PHY payload for Python3
jankralx/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
jankralx/tt04-fm-transmitter
Submission template for Tiny Tapeout 04
jankralx/tt04-fm-transmitter-fpga-tb
FPGA test for TT04 FM transmitter
jankralx/UNIV_3.1.3.x
BUTTON MODULE - 14 close/open inputs, 1-wire temperature sensor, thermostat, temperature controller
jankralx/UNIV_3.101.0.x
RS232C INTERFACE - PC interface and interface to other devices with serial port