janoc/RF24-STM

RF24 for STM32duino. nRF24L01+ supporf for STM32F103 Arduino

STM32duino driver for nRF24L01 2.4GHz Wireless Transceiver

This is a modified version of the maniacbug RF24 library that can be found here https://github.com/maniacbug/RF24 . It has been modified to work with the stm32f103 on the Arduino platform. The project for this can be found here. https://github.com/rogerclarkmelbourne/Arduino_STM32

Design Goals: This library is designed to be...

• Maximally compliant with the intended operation of the chip
• Easy for beginners to use
• Consumed with a public interface that's similiar to other Arduino standard libraries
• Built against the standard SPI library.

Please refer to:

• Documentation Main Page
• RF24 Class Documentation
• Source Code
• Downloads
• Chip Datasheet

This chip uses the SPI bus, plus two chip control pins. Remember that pin 10 must still remain an output, or the SPI hardware will go into 'slave' mode.