Eternal Terminal is a remote shell that automatically reconnects without interrupting the session.
Website: https://mistertea.github.io/EternalTerminal/.
The easiest way to install is using homebrew:
brew install MisterTea/et/et
For Ubuntu, use our PPA:
sudo add-apt-repository ppa:jgmath2000/et
sudo apt-get update
sudo apt-get install et
Install and build from source:
sudo apt install build-essential libgflags-dev libprotobuf-dev protobuf-compiler libsodium-dev cmake git
git clone --recurse-submodules https://github.com/MisterTea/EternalTerminal.git
cd EternalTerminal
mkdir build
cd build
cmake ../
make && sudo make install
sudo cp ../etc/et.cfg /etc/
Once built, the binary only requires libgflags-dev.
For debian, use our deb repo. For stretch:
echo "deb https://mistertea.github.io/debian-et/debian-source/ stretch main" | sudo tee -a /etc/apt/sources.list
curl -sS https://mistertea.github.io/debian-et/et.gpg | sudo apt-key add -
sudo apt update
sudo apt install et
Note: As of April 2019, the service does not start on CentOS 7, see #182
Install dependencies:
sudo yum -y install epel-release
sudo yum install cmake3
sudo yum install boost-devel libsodium-devel ncurses-devel protobuf-devel \
protobuf-compiler cmake gflags-devel
Download and install from source:
git clone --recurse-submodules https://github.com/MisterTea/EternalTerminal.git
cd EternalTerminal
mkdir build
cd build
cmake3 ../
make && sudo make install
sudo cp ../systemctl/et.service /etc/systemd/system/
sudo cp ../etc/et.cfg /etc/
Find the actual location of et:
which etserver
Correct the service file: Open up /etc/systemd/system/et.service in an editor. Correct the ExectStart line to have the correct path to the etserver binary (see #180).
ExecStart=/usr/local/bin/etserver --daemon --cfgfile=/etc/et.cfg
Start the et service:
sudo systemctl enable et.service
sudo systemctl start et.service
On FreeBSD, use:
pkg install eternalterminal
sudo dnf install et
Install dependencies:
-
Fedora (tested on 25):
sudo dnf install boost-devel libsodium-devel ncurses-devel protobuf-devel \protobuf-compiler cmake gflags-devel
-
Gentoo:
sudo emerge dev-libs/boost dev-libs/libsodium sys-libs/ncurses \dev-libs/protobuf dev-util/cmake dev-cpp/gflags
Download and install from source:
git clone --recurse-submodules https://github.com/MisterTea/EternalTerminal.git
cd EternalTerminal
mkdir build
cd build
cmake ../
make
sudo make install
Eternal Terminal works under WSL (Windows Subsystem for Linux). Follow the ubuntu instructions.
Verify that the client is installed correctly by looking for the et executable: which et.
Verify that the server is installed correctly by checking the service status: systemctl status et. On some operating systems, you may need to enable and start the service manually: sudo systemctl enable et; sudo systemctl start et.
You are ready to start using ET!
If you'd like to modify the server settings (e.g. to change the listening port), edit /etc/et.cfg.
ET uses ssh for handshaking and encryption, so you must be able to ssh into the machine from the client. Make sure that you can ssh user@hostname.
ET uses TCP, so you need an open port on your server. By default, it uses 2022.
Once you have an open port, the syntax is similar to ssh. Username is default to the current username starting the et process, use -u or user@ to specify a different if necessary.
et hostname (etserver running on default port 2022, username is the same as current)
et user@hostname:8000 (etserver running on port 8000, different user)
You can specify a jumphost and the port et is running on jumphost using -jumphost and -jport. If no -jport is given, et will try to connect to default port 2022.
et hostname -jumphost jump_hostname (etserver running on port 2022 on both hostname and jumphost)
et hostname:8888 -jumphost jump_hostname -jport 9999
Additional arguments that et accept are port forwarding pairs with option -t="18000:8000, 18001-18003:8001-8003", a command to run immediately after the connection is setup through -c.
Starting from the latest release, et supports parsing both user-specific and system-wide ssh config file. The config file is required when your sshd on server/jumphost is listening on a port which is not 22. Here is an example ssh config file showing how to setup when
- there is a jumphost in the middle
- sshd is listening on a port which is not 22
- connecting to a different username other than current one.
Host dev
HostName 192.168.1.1
User fred
Port 5555
ProxyJump user@jumphost.example.org:22
With the ssh config file set as above, you can simply call et with
et dev (etserver running on port 2022 on both hostname and jumphost)
et dev:8000 -jport 9000 (etserver running on port 9000 on jumphost)
To build eternal terminal on mac, the easiest way is to grab dependencies with homebrew:
brew install --only-dependencies MisterTea/et/et
git clone --recurse-submodules https://github.com/MisterTea/EternalTerminal.git
cd EternalTerminal
mkdir build
cd build
cmake ../
make
Grab the deps and then follow this process:
Debian/Ubuntu Dependencies:
sudo apt install libboost-dev libsodium-dev libncurses5-dev libprotobuf-dev protobuf-compiler cmake libgflags-dev libutempter-dev cmake git
CentOS/RHEL Dependencies:
sudo yum -y install epel-release
sudo yum install cmake3
sudo yum install boost-devel libsodium-devel ncurses-devel protobuf-devel \
protobuf-compiler cmake gflags-devel
Source and setup:
git clone --recurse-submodules https://github.com/MisterTea/EternalTerminal.git
cd EternalTerminal
mkdir build
cd build
cmake ../
make
sudo make install
Copy config file, the service and enable it:
sudo cp ../systemctl/et.service /etc/systemd/system/
sudo cp ../etc/et.cfg /etc/
sudo systemctl enable et.service
sudo systemctl start et.service
If you have any problems with installation or usage, please file an issue on github.
- Jason Gauci: https://github.com/MisterTea
- Ailing Zhang: https://github.com/ailzhang