/enso

Ensō is a high-performance streaming interface for NIC-application communication.

Primary LanguageSystemVerilogBSD 3-Clause Clear LicenseBSD-3-Clause-Clear

Ensō

docs DOI

Enso

Ensō is a high-performance streaming interface for NIC-application communication.

Ensō's design encompasses both hardware and software. The hardware component targets an FPGA NIC1 and implements the Ensō interface. The software component uses this interface and exposes simple communication primitives called Ensō Pipes. Applications can use Ensō Pipes to send and receive data in different formats, such as raw packets, application-level messages, or TCP-like byte streams.

Refer to the OSDI '23 paper for details about the design and to the documentation to find out how to use Ensō for your own projects.

Why Ensō?

Traditionally, NICs expose a packetized interface that software (applications or the kernel) must use to communicate with the NIC. Ensō provides two main advantages over this interface:

  • Flexibility: While NICs were traditionally in charge of delivering raw packets to software, an increasing amount of high-level functionality is now performed on the NIC. The packetized interface, however, forces data to be fragmented into packets that are then scattered across memory. This prevents the NIC and the application from communicating efficiently using higher-level abstractions such as application-level messages or TCP streams. Ensō instead allows the NIC and the application to communicate using a contiguous stream of bytes, which can be used to represent arbitrary data.
  • Performance: By forcing hardware and software to synchronize buffers for every packet, the packetized interface imposes significant per-packet overhead both in terms of CPU cycles as well as PCIe bandwidth. This results in significant performance degradation, in particular when using small requests. Ensō's use of a byte stream interface allows the NIC and the application to exchange multiple packets (or messages) at once, which reduces the number of CPU cycles and PCIe transactions required to communicate each request. Moreover, by placing packets (or messages) contiguously in memory, Ensō makes better use of the CPU prefetcher, vastly reducing the number of cache misses.

Getting started

Footnotes

  1. Network Interface Cards (NICs) are the hardware devices that connect a computer to the network. They are responsible for transmitting data from the CPU to the network and vice versa. FPGAs are reconfigurable hardware devices. They can be reconfigured to implement arbitrary hardware designs. Here we use an FPGA to implement a NIC with the Ensō interface but the same interface could also be implemented in a traditional fixed-function hardware.