MariaDb Galera Cluster

This Docker container is based on the official Docker mariadb:10.1 image and is designed to be compatible with auto-scheduling systems, specifically Docker Swarm Mode (1.12+) and Kontena. However, it could also work with manual scheduling (docker run) by specifying the correct environment variables or possibly other scheduling systems that use similar conventions.

It takes as a command one of the following:

"seed" - Used only to initialize a new cluster and after initialization and other nodes are joined the "seed" container should be stopped and replaced with a "node" container using the same volume.
"node" - Join an existing cluster. Takes as a second argument a comma-separated list of IPs or hostnames to resolve which are used to build the --wsrep_cluster_address option for joining a cluster.
"no-galera" - Start server with Galera disabled. Useful for maintenance tasks like performing mysql_upgrade and resetting root credentials.
"sleep" - Start the container but not the server. Runs "sleep infinity". Useful just to get volumes initialized or if you want to docker exec without the server running.

By using DNS resolution to discover other nodes they don't have to be specified explicitly. This should work with any system with DNS-based service discovery such as Kontena, Docker Swarm Mode, Consul, etc.

How It Works

This is not a simple config update, much effort has gone into making this container automate the initialization and recovery of a cluster. The entrypoint script orchestrates full recovery on simultaneous reset by having nodes communicate with each other before starting the mysqld process to ensure that the cluster is recovered correctly. It does this by examining Galera's state files, recovering the GTID position on all nodes and then communicating this between nodes to find the most up-to-date one to form a new cluster if needed. It also provides multiple healthcheck endpoints for varying degress of healthiness to aid with integration of load balancers and scheduling systems.

Examples

Docker 1.12 Swarm Mode (cli)

 $ docker service create --name galera-seed --replicas 1 -e XTRABACKUP_PASSWORD=<pass> \
     colinmollenhour/mariadb-galera-swarm seed
 $ docker service create --name galera --replicas 2 -e XTRABACKUP_PASSWORD=<pass> \
     colinmollenhour/mariadb-galera-swarm node tasks.galera-seed,tasks.galera
 $ docker service rm galera-seed
 $ docker service scale galera=3

Docker 1.13 Swarm Mode (stack)

Kontena

Please submit more examples for Kubernetes, Mesos, etc. and also improvements for existing examples!

Environment Variables

XTRABACKUP_PASSWORD (required unless XTRABACKUP_PASSWORD_FILE is provided)
SYSTEM_PASSWORD (required or set to a hash of XTRABACKUP_PASSWORD if provided.)
CLUSTER_NAME (optional)
NODE_ADDRESS (optional - defaults to ethwe, then eth0)
LISTEN_WHEN_HEALTHY (optional) - Specify a port number to open a healthcheck socket on once the cluster has reached a healthy state. Useful with Kontena's wait_for_port feature.
HEALTHY_WHILE_BOOTING (optional) - If '1' then the HEALTHCHECK script will report healthy during the boot phase (waiting for DNS to resolve and recovering wsrep position).
SKIP_TZINFO (optional) - Specify any value to skip loading of timezone table data when initing a new directory.
DEFAULT_TIME_ZONE (optional - defaults to the TZ envvar or to '+00:00' if undefined) - Specify the database's time zone, either in numeric format (+01:00) or in verbal format (CET, Europe/Bratislava, etc.). The latter one is possible only if you haven't specified SKIP_TZINFO. More information about why you would need this is here.
SST_METHOD (optional - defaults to 'xtrabackup-v2') May be set to 'rsync' or 'mysqldump'. Other methods requiring further configuration or installed dependencies are not available in this image.

Additional variables for "seed":

MYSQL_ROOT_PASSWORD (optional)
MYSQL_DATABASE (optional)
MYSQL_USER (optional)
MYSQL_PASSWORD (optional)

Additional variables for "node":

GCOMM_MINIMUM (optional - defaults to 2)

Providing secrets through files

It's also possible to configure the sensitive variables using files, a method used by Docker Swarm, Rancher and perhaps others. The paths to the secret files defaults to /run/secrets/{lower_case_variable_name} but can be specified explicitly as well using the following environment variables:

XTRABACKUP_PASSWORD_FILE
SYSTEM_PASSWORD_FILE
MYSQL_ROOT_PASSWORD_FILE
MYSQL_PASSWORD_FILE
MYSQL_DATABASE_FILE

Flag Files

In order to accomodate controlling the bootstrapping phase without having to change the CMD which is sometimes hard to do with automated schedulers you can touch the following files to change the bootstrapping behavior before starting the container. All files are expected to be in the /var/lib/mysql directory which you should be mounting as a container volume.

/var/lib/mysql/new-cluster - Cause a 'node' container to behave as a 'seed' container on it's first run. This may also be used for recovery in case a Primary Component cannot be formed or for bootstrapping a fresh cluster in place of using the 'seed' container. If the file has any contents they will be used as the MYSQL_ROOT_PASSWORD.
/var/lib/mysql/hold-start - Cause a 'node' container to wait until this file is deleted before trying to boot. This could be used in the absence of a scheduler with an easy fine-grained scheduling control.
/var/lib/mysql/force-cluster-bootstrapping - Force the creation of MySQL users again ('seed' or 'node' command).
/var/lib/mysql/skip-cluster-bootstrapping - Prevent the creation of MySQL users. This file will be created and should not be deleted under normal circumstances.

Health Checks

By default there are two HTTP-based healthcheck servers running in the background.

Port 8080 only reports healthy when ready to serve clients. (synced)
Port 8081 reports healthy as long as the server is synced or donor/desynced state. This one is used to help other nodes determine cluster state before launching the server and also by the Dockerfile HEALTHCHECK command.

The default HEALTHCHECK command also returns healthy status if /var/lib/mysql/sst_in_progress is present to avoid a node being killed during an SST. Otherwise it uses the second health check (port 8081) to return healthy only if it is 'synced' to prevent the node from being killed if it is a donor for a long period of time. How you want the healthcheck command to behave will vary on your uses for the healthcheck so you may need to override it depending on the behavior you desire. Regardless, both healthcheck servers will be started and will use negligible resources unless they are actually being pinged.

Additionally, if a LISTEN_WHEN_HEALTHY port number is specified then the container will start a loop checking it's own port 8080 health check described above until it reports healthy at which point it will open a new socket on this port which just forwards to port 8080. This can be used with Kontena's wait_for_port feature to accomodate the rolling update mechanism.

More Info

Tries to handle as many recovery scenarios as possible including full cluster ungraceful shutdown by using --wsrep-recovery and inter-node communication to discover the optimal node for bootstrapping a new cluster when the old one cannot be recovered.
If you need to perform manual recovery of a previously healthy cluster you can use "node" mode but touch a file at /var/lib/mysql/new-cluster to force a node to bootstrap a new cluster and bypass the automatic recovery steps.
XtraBackup is used for state transfer and MariaDb now supports pc.recovery so the primary component should automatically be recovered in the case of all nodes being gracefully shutdown. It is important tha all nodes are started together so that they can communicate status with each-other.
A go server runs within the cluster exposing an http service for intelligent health checking.
- Port 8080 is used by the Docker 1.12 HEALTHCHECK feature and also can be used by any other health checking node in the network such as HAProxy or Consul to determine readable/writeable nodes.
- Port 8081 is used to detemine cluster status
If your container network uses something other than ethwe* or eth0 then you need to specify NODE_ADDRESS as either the name of the interface to listen on or a grep pattern to match one of the container's IP addresses. E.g.: NODE_ADDRESS='^10.0.1.*'
When using DNS for node address discovery the container entrypoint script will wait indefinitely for GCOMM_MINIMUM IP addresses to resolve before trying to start mysqld in case some containers are starting slower than others to increase the chance of a healthy recovery. Scenarios where not enough IPs would resolve might include:
- Some nodes may finish pulling container images from remote repositories sooner than others
- Schedulers may not be launching nodes quickly enough
- Service discovery systems may be slow to propagate updates via DNS
If the file /usr/local/lib/startup.sh exists it will be sourced in the start.sh script.
If you need to promote a running node to be a new "Primary Component" you can run the following command to do so: $ docker exec -i mysql -p /primary-component.sql
You can monitor cluster state changes more clearly by setting wsrep_notify_cmd to /usr/local/bin/notify.sh which will output the updates to the Docker logs/console.

Credit

Forked from "jakolehm/docker-galera-mariadb-10.0"
- Forked from "sttts/docker-galera-mariadb-10.0"
galera-healthcheck go binary from "sttts/galera-healthcheck"

Changes

Rebase on official Docker mariadb:10.1 image and fix for new 10.1 changes.
Add support for Docker Swarm Mode by falling back to eth0 if no ethwe adapter found.
Support any adapter/IP by specifying NODE_ADDRESS=<interface|pattern>.
Fix running mysqld as root using gosu mysql mysqld.sh.
Add support for HEALTHCHECK for Docker 1.12.
Delay starting mysqld until at least GCOMM_MINIMUM total nodes are up when using DNS resolution for node list.
Bundle galera-healthcheck binary.
Completely rewrite mysqld.sh startup script for proper cluster bootstrapping and recovery.
Add sourcing of /usr/local/lib/startup.sh for easier entrypoint extension.
Add 'sleep', 'no-galera' and 'bash' modes for easier maintenance/debugging.
Various other minor improvements.

javashop/mariadb-galera-swarm