Thermostat - Esphome Home Assistant - Nextion-3.2 inches
This version allows you to manage the thermostat via Home Assistant and in the absence of the server simply ON / OFF in manual mode touch nextion. To carry out the project with logic even in the absence of Home Assistant and therefore in offline mode, I refer you to the specific version, always in my repository. Link project later
Home Assistant - Thermostat Touch Nextion - Firmware ESPHOME
This is a generic Home Assistant thermostat, managed by an ESP8266 chip and a 3.2 "Nextion touch screen panel.
ESPHOME documentation: https://esphome.io/index.html
Home Assistant documentation: https://www.home-assistant.io/
NEXTION documentation: https://nextion.tech/
Hardware needed:
1 - RaspberryPi 3 or higher
2 - ESP8266-12 chip
3 - Touch Screen Panel NEXTION 3.2 "
Software:
1 - download and copy home assistant image on sd card for raspberryPi
2 - add ESPHOME add on to your Home Assistant
3 - upload the firmware to yaml on ESP8266 via Home Assistant add on
4 - upload .HMI to next touch panel
5 - copy the configuration.yaml content and paste in configuration.yaml in Home Assistant
6 - copy the automation.yaml content and paste in automation.yaml in Home Assistant
Good realization