home-assistant-homematic
Integrating homematic devices into Home-Assistant using pyhomematic
WARNING: Currently experimental.
###Currently only following HA device types are supported:
- Light
- Switch
- Rollershutter
- Binary_sensor (partially)
###Installation:
- Make sure pyhomematic (https://github.com/danielperna84/pyhomematic) is installed.
- Copy files into homeassistant\components and subfolders. Do not place them in .homeassistant/custom_components/
Devices are depended on mapping in pyhomematic (only few Homematic devices exist there. Appending in _devices.py (bottom) could be a good idea. (Click here for more info)
###Configuration as for other HA platformms (configuration.yaml).
Example extract from configuration.yaml:
homematic:
local_ip: "192.X.X.X" # IP of machine running home-assistant
local_port: 8059 # Port of machine running home-assistant (can be freely defined)
remote_ip: "192.X.X.X" # IP of CCU/CCU2/Homegear (can also be 127.0.0.1 if Homegear runs on the same machine)
remote_port: 2001 # Port of CCU/CCU2/Homegear XML RPC Server (default: 2001)
autodetect: 'False' # If true all known devices are added automatically. No configuration of devices in configuration.yaml required (currently experimental!)
switch:
platform: homematic
address: 'JEQxxxxxxx'
name: 'TV set'
light:
platform: homematic
address: 'LEQxxxxxxx'
name: 'Sideboard Light'
rollershutter:
platform: homematic
address: 'KEQxxxxxxx'
name: 'Kitchen'
binary_sensor:
platform: homematic
address: 'KEQxxxxxxx'
name: 'Door'