The RoomMe and RoomMe room module work together to interface a Crestron system with RoomMe personal location sensors. The RoomMe module interfaces with the RoomMe personal location sensors, parses the data sent to them by the RoomMe sensors and passes that data along to the RoomMe Room modules. One RoomMe Room module is required for each room that contains a RoomMe sensor. IMPORTANT - When you enter the address of your Crestron processor in the RoomMe app. You must enter the ip address and port as follows: http://192.168.1.10:9000 where 192.168.1.10 is your processors IP address and 9000 is the port you specified for communication in the parameter field of the RoomMe v1.1 module. If you don't include the http:// in front of the address it won't work. Also, you must enter the room names in the parameter of the RoomMe Room Module v1.1 exactly as they are defined in the RoomMe app. These are case sensitive. RoomMe Module Parameters Port - Port that the RoomMe sensors will use for http communications to the Crestron system RoomMe Module Inputs Initialize - Pulsed at startup to initialize the module and prepare it to receive data RoomMe Module Outputs Data$ - Messages that are passed to the RoomMe Room modules RoomMe Room Module Parameters Room_Name - Name of the Room that this module will control. This name must exactly match the room name specified in the RoomMe app for the sensor in the room RoomMe Room Module Inputs Data$ - Message input from the RoomMe module output RoomMe Room Module Outputs Low_Battery - Output will pulse if a low battery message is received from the RoomMe sensor in this room Occupied - High while the room is occupied. Low when it is not occupied Controlling_User_ID - 0 when the room isn't occupied. Otherwsie the output will be the 1 based ID of the user who the RoomMe sensor determines with the highest priority and is in control of the room. Note - RoomMe user ID's are zero based so this value is the RoomMe user ID + 1 Controlling_Username$ - Name of the user that the RoomMe sensr has determined has the highest priority and is in control of the room.