A smart watch based on M5Stick of ESP32
https://item.taobao.com/item.htm?id=581055502939
Use ESP-idf + Arduino to build this project with configuration: M5Stack-Core-ESP32, QIO, 80MHz, No OTA (Large APP), 921600, Verbose
StickWatch.ino 파일의 경로
1. Arduino IDE에서 Tools -> Partition Scheme -> Large App No OTA를 선택
2. 다음의 라이브러리의 설치가 필요함
- Wifi
3. WIFI 설정
시간을 올바르게 표시하려면 WIFI를 구성해야 함.
config.h 파일을 열고 라인 5와 6을 수정하고 wifi 계정과 암호로 변경하십시오.
// user configurable variables start
const char* BUILTIN_WIFI_SSID = "Your WIFI ssid";
const char* BUILTIN_WIFI_PASSWORD = "********";
그런 다음 StickWatch.ino을 컴파일하고 다운로드.
스틱에 해당 하드웨어 회로가 지원되지 않으므로 스틱에 표시된 온도 및 전압 값을 프로그래밍 할 수 없으면 사용할 수 없습니다.