jblance/mpp-solar

Issues

• How to use mpp-solar on windows?

  #519 opened 22 days ago by mabs239
  2

• Request to decode Q2 command

  #520 opened 25 days ago by mabs239
  3

• JKBMS V4.23.0 cannot read data

  #504 opened 5 months ago by asenyshyn
  3

• Fragmented cellVoltage serial response with Daly BMS

  #516 opened 2 months ago by klvbdmh
  5

• ademon not working with alpine and openrc

  #518 opened 2 months ago by Tuxist
  2

• Installation error

  #517 opened 2 months ago by ogry
  4

• Axpert MKS IV Hybrid stops responding every few weeks

  #509 opened 2 months ago by ThisIsQasim
  3

• Python version 3.12 rquirement breaks Debian 12 installation

  #502 opened 2 months ago by gianfrdp
  1

• QUESTION

  #505 opened 2 months ago by devyaz
  6

• Can not pair with iPhone

  #507 opened 2 months ago by Maloya01
  1

• Heltec balancer support

  #511 opened 2 months ago by B4rtOl0
  19

• Axpert Inverex Aerox 5.2KW not able to get all values

  #512 opened 3 months ago by abdulrehman1937
  9

• Sending JK BMS PB-x firmware update command via BLE

  #510 opened 3 months ago by tarek-zy
  11

• mppsolar do not display correctly on JK-B1A8S20P

  #515 opened 2 months ago by dearteno
  4

• API documentation out of date?

  #513 opened 2 months ago by diminDDL
  1

• JKBMS and RS485 strange output? Looks different/better with new cable...

  #506 opened 4 months ago by axyaxyfr
  10

• Docker: Run mpp-solar as a daemon?

  #499 opened 5 months ago by nullinger
  8

• QPIWS command problem

  #503 opened 5 months ago by a-mkh
  2

• wrong output if jk04 and jkv11 used in config (different proto per section)

  #496 opened 6 months ago by mfu-mcosys
  9

• Two different BMSes same issue, all values other than cell voltages wrong.

  #500 opened 5 months ago by lukolszewski
  1

• ERROR: No matching distribution found for mppsolar

  #498 opened 5 months ago by Delta06450
  5

• Can't set charge voltages on MPPSolar MPI 15K

  #485 opened 8 months ago by danieltroger
  12

• MQTT problem

  #491 opened 7 months ago by ols-hub
  1

• Voltronic Infinisolar V II WP 5Kw no data read

  #489 opened 7 months ago by legolas3107
  29

• install mppsolar[systemd] fail

  #473 opened 7 months ago by sante85
  1

• JK BMS BLE Not Working - AttributeError: 'str' object has no attribute 'get_data_value'

  #415 opened 7 months ago by luckylinux
  6

• pip install mppsolar[ble] Freeze Raspberry PI Zero W2

  #476 opened 7 months ago by fableman73
  11

• PACE BMS protocol

  #480 opened 8 months ago by ols-hub
  1

• Non-programmer here. I think something is amiss with paho-mqtt, mqttbrokerc.py and / or callbackapiversion. I'm flailing in the dark...

  #488 opened 7 months ago by bobcov
  3

• Most time connect error BLE

  #481 opened 8 months ago by reset12
  1

• Does mpp-solar works with new JK-BMS (using RS485 internal bus or CAN bus)?

  #460 opened 8 months ago by txubelaxu
  23

• JK-BD6A20S10P BLE Issue "No module found for protocol jkv11"

  #482 opened 8 months ago by Janl1
  1

• Wont run on raspbian bullseye.

  #477 opened 9 months ago by DannySkjodt1
  5

• Change "generated_energy" description to more specific

  #463 opened 9 months ago by JakobTewes
  9

• Connection timed out- easun inverter P18SV

  #474 opened 9 months ago by dandreic02
  1

• hassd_mqtt does not work with multiple inverters

  #437 opened 9 months ago by rene-dev
  2

• Can not read the total battery voltage?

  #425 opened 9 months ago by SuperTunaa
  1

• Waveshare RS232/RS485 to Ethernet Converter Question

  #457 opened 10 months ago by preussal
  4

• Protocol issue for JK-B2A8S20P-H with heating port

  #461 opened 10 months ago by the-duke
  7

• PI17 - BATS command prompts error

  #459 opened 10 months ago by stefanK74
  3

• smart shunt fail read some fields

  #458 opened 10 months ago by sante85
  3

• Command ACCT0200-0500 was rejected

  #453 opened a year ago by eMindFfM
  7

• KeyError: 'Y' with PI30

  #454 opened a year ago by FastFrank
  1

• powermon doen't read command_definitions from specific protocol files

  #452 opened a year ago by StevenHodl
  1

• Regarding to JK BMS CAN Data reading

  #445 opened a year ago by Sanket01-ai
  4

• I am facing problems to read CAN Data feom BMS of model JK B2A24S15P, Please help me as soon as passible .I am waiting yours all response.

  #448 opened a year ago by Sanket01-ai
  2

• Unable to export to PostgreSQL - No module found for output processor postgresql Error: No module named 'mppsolar.outputs.postgresql'

  #443 opened a year ago by adinetech
  11

• multiple hidraw inverters

  #436 opened a year ago by rene-dev
  14

• how can I update mpp-solar

  #421 opened a year ago by ts1cos
  28

• crash after update

  #423 opened a year ago by knocki12
  2