script to install companion on RPi 3 with a PiRaq .
use PiRaq image https://drive.google.com/open?id=1afkOQGkFdZRpDQW7yNO8YGyvY-oKoni2
connect pi to the internet
ssh into pi or use a keyboad to run
curl https://raw.githubusercontent.com/jbucky86/PiRaq_Companion_Installer/master/PiRaqCompanion.sh | bash
it will take a while but that should take care of everthing
The encoder will scroll the webpage
center button will use button 12 on page 99
up will jump up
down will jump down
left will goto top of page
right will goto bottom
hold right and hit center button will change the Pi Ip addreas to 192.168.86.4
hold left and hit center button will set the rpi to DHCP. if dhcp fails it will revert to 192.168.1.2
hold left and right will reboot rpi
i havent found a way to get it to the size i want by default so if you hold down and use the encodor it will zoom the screen or youll need to plug in a keyboard and use ctrl+(-) to size it. this only needs to be done once chrome will save the size. To have all 12 button from one page on the screen at once set it to 80%
The rest is on you