/semver-resource

automated semantic version bumping

Primary LanguageGoApache License 2.0Apache-2.0

Semver Resource

A resource for managing a version number. Persists the version number in an S3 bucket or a Git repository.

Source Configuration

  • initial_version: Optional. The version number to use when bootstrapping, i.e. when there is not a version number present in the source.

  • driver: Optional. Default s3. The driver to use for tracking the version. Determines where the version is stored.

There are three supported drivers, with their own sets of properties for configuring them.

git Driver

The git driver works by modifying a file in a repository with every bump. The git driver has the advantage of being able to do atomic updates.

  • uri: Required. The repository URL.

  • branch: Required. The branch the file lives on.

  • file: Required. The name of the file in the repository.

  • private_key: Optional. The SSH private key to use when pulling from/pushing to to the repository.

  • username: Optional. Username for HTTP(S) auth when pulling/pushing. This is needed when only HTTP/HTTPS protocol for git is available (which does not support private key auth) and auth is required.

  • password: Optional. Password for HTTP(S) auth when pulling/pushing.

  • git_user: Optional. The git identity to use when pushing to the repository support RFC 5322 address of the form "Gogh Fir gf@example.com" or "foo@example.com".

s3 Driver

The s3 driver works by modifying a file in a bucket.

  • bucket: Required. The name of the bucket.

  • key: Required. The key to use for the object in the bucket tracking the version.

  • access_key_id: Required. The AWS access key to use when accessing the bucket.

  • secret_access_key: Required. The AWS secret key to use when accessing the bucket.

  • region_name: Optional. Default us-east-1. The region the bucket is in.

  • endpoint: Optional. Custom endpoint for using S3 compatible provider.

  • disable_ssl: Optional. Disable SSL for the endpoint, useful for S3 compatible providers without SSL.

swift Driver

The swift driver works by modifying a file in a container.

  • openstack Required. All openstack configuration must go under this key.

    • container: Required. The name of the container.

    • item_name: Required. The item name to use for the object in the container tracking the version.

    • region_name: Required. The region the container is in.

    • identity_endpoint, username, user_id, password, api_key, domain_id, domain_name, tenant_id, tenant_name, allow_reauth, token_id: See below The swift driver uses gophercloud to handle interacting with OpenStack. All OpenStack Identity versions are supported through this library. The Authentication properties will pass through to it. For detailed information about the individual parameters, see https://github.com/rackspace/gophercloud/blob/master/auth_options.go

Example

With the following resource configuration:

resources:
- name: version
  type: semver
  source:
    driver: git
    uri: git@github.com:concourse/concourse.git
    branch: version
    file: version
    private_key: {{concourse-repo-private-key}}

Bumping with a get and then a put:

plan:
- get: version
  params: {bump: minor}
- task: a-thing-that-needs-a-version
- put: version
  params: {file: version/number}

Or, bumping with an atomic put:

plan:
- put: version
  params: {bump: minor}
- task: a-thing-that-needs-a-version

Behavior

check: Report the current version number.

Detects new versions by reading the file from the specified source. If the file is empty, it returns the initial_version. If the file is not empty, it returns the version specified in the file if it is equal to or greater than current version, otherwise it returns no versions.

in: Provide the version as a file, optionally bumping it.

Provides the version number to the build as a number file in the destination.

Can be configured to bump the version locally, which can be useful for getting the final version ahead of time when building artifacts.

Parameters

Note that bump and pre don't update the version resource - they just modify the version that gets provided to the build. An output must be explicitly specified to actually update the version.

out: Set the version or bump the current one.

Given a file, use its contents to update the version. Or, given a bump strategy, bump whatever the current version is. If there is no current version, the bump will be based on initial_version.

The file parameter should be used if you have a particular version that you want to force the current version to be. This can be used in combination with in, but it's probably better to use the bump and pre params as they'll perform an atomic in-place bump if possible with the driver.

Parameters

One of the following must be specified:

  • file: Optional. Path to a file containing the version number to set.

  • bump and pre: Optional. See Version Bumping Semantics.

When bump and/or pre are used, the version bump will be applied atomically, if the driver supports it. That is, if we pull down version N, and bump to N+1, the driver can then compare-and-swap. If the compare-and-swap fails because there's some new version M, the driver will re-apply the bump to get M+1, and try again (in a loop).

Version Bumping Semantics

Both in and out support bumping the version semantically via two params: bump and pre:

  • bump: Optional. Bump the version number semantically. The value must be one of:

    • major: Bump the major version number, e.g. 1.0.0 -> 2.0.0.
    • minor: Bump the minor version number, e.g. 0.1.0 -> 0.2.0.
    • patch: Bump the patch version number, e.g. 0.0.1 -> 0.0.2.
    • final: Promote the version to a final version, e.g. 1.0.0-rc.1 -> 1.0.0.

  • pre: Optional. When bumping, bump to a prerelease (e.g. rc or alpha), or bump an existing prerelease.

If present, and the version is already a prerelease matching this value, its number is bumped. If the version is already a prerelease of another type, (e.g. alpha vs. beta), the type is switched and the prerelease version is reset to 1. If the version is not already a pre-release, then pre is added, starting at 1.