/zumo-32u4-arduino-library

Library to help interface with the on-board hardware of the Pololu Zumo 32U4 robot.

Primary LanguageC++OtherNOASSERTION

Zumo32U4 library

Version: 1.1.4
Release date: 2017-07-17
Build Status
www.pololu.com

Summary

This is a C++ library for the Arduino IDE that helps access the on-board hardware of the Zumo 32U4 robot.

The Zumo 32U4 robot consists of the Zumo chassis, the Zumo 32U4 Main Board, and the Zumo 32U4 Front Sensor Array. It has an integrated AVR ATmega32U4 microcontroller, motor drivers, encoders, proximity sensors, line sensors, buzzer, four buttons, LCD connector, LSM303D accelerometer, and L3GD20H gyro. The user's guide for the Zumo 32U4 robot is here:

https://www.pololu.com/docs/0J63

Please note that this library does NOT work with the Zumo Shield for Arduino, which is a very different product. The Zumo Shield does not have an integrated microcontroller, so it must be connected to an Arduino-sized board to run. If you have the Zumo Shield, then you should not use this library and instead refer to the Zumo Shield documentation here.

Installing the library

If you are using version 1.6.2 or later of the Arduino software (IDE), you can use the Library Manager to install this library:

  1. In the Arduino IDE, open the "Sketch" menu, select "Include Library", then "Manage Libraries...".
  2. Search for "Zumo32U4".
  3. Click the Zumo32U4 entry in the list.
  4. Click "Install".

If this does not work, you can manually install the library:

  1. Download the latest release archive from GitHub and decompress it.
  2. Rename the folder "zumo-32u4-arduino-library-master" to "Zumo32U4".
  3. Move the "Zumo32U4" folder into the "libraries" directory inside your Arduino sketchbook directory. You can view your sketchbook location by opening the "File" menu and selecting "Preferences" in the Arduino IDE. If there is not already a "libraries" folder in that location, you should make the folder yourself.
  4. After installing the library, restart the Arduino IDE.

Examples

Several example sketches are available that show how to use the library. You can access them from the Arduino IDE by opening the "File" menu, selecting "Examples", and then selecting "Zumo32U4". If you cannot find these examples, the library was probably installed incorrectly and you should retry the installation instructions above.

Classes and functions

The main classes and functions provided by the library are listed below:

  • L3G
  • LSM303
  • Zumo32U4ButtonA
  • Zumo32U4ButtonB
  • Zumo32U4ButtonC
  • Zumo32U4Buzzer
  • Zumo32U4Encoders
  • Zumo32U4IRPulses
  • Zumo32U4LCD
  • Zumo32U4LineSensors
  • Zumo32U4Motors
  • Zumo32U4ProximitySensors
  • ledRed()
  • ledGreen()
  • ledYellow()
  • usbPowerPresent()
  • readBatteryMillivolts()

Component libraries

This library also includes copies of several other Arduino libraries inside it which are used to help implement the classes and functions above.

You can use these libraries in your sketch automatically without any extra installation steps and without needing to add any extra #include lines to your sketch.

You should avoid adding extra #include lines such as #include <Pushbutton.h> because then the Arduino IDE might try to use the standalone Pushbutton library (if you previously installed it), and it would conflict with the copy of the Pushbutton code included in this library. The only #include lines needed to access all features of this library are:

#include <Wire.h>
#include <Zumo32U4.h>

Documentation

For complete documentation, see https://pololu.github.io/zumo-32u4-arduino-library. If you are already on that page, then click on the links in the "Classes and functions" section above.

Version history

  • 1.1.4 (2017-07-17): Fixed a bug that caused errors from the right encoder to be reported as errors from the left encoder.
  • 1.1.3 (2016-10-12): Fixed a bug that caused the buzzer's isPlaying method to malfunction sometimes when link time optimization is enabled. Also incorporated some minor fixes to the QTRSensors and LSM303 libraries.
  • 1.1.2 (2016-03-14): Updated the Demo example so it can compile in Arduino 1.6.7.
  • 1.1.1 (2015-09-01): Moved the library out of the a-star repository into its own repository. Added Demo example.
  • 1.1.0 (2015-05-06): Updated FastGPIO to version 1.0.2. Fixed a bug in Zumo32U4ProximitySensors where the wrong array length was used. Added five demos: RotationResist, FaceUphill, RemoteControl, Balancing, and SumoProximitySensors.
  • 1.0.1 (2015-03-11): Improve the Buttons example.
  • 1.0.0 (2015-03-05): Original release.