##radioemitter
Radio emitter is used to controll radio plugs.
This module is for gladys v3
It use the module gladys-serial to send a radio code to the arduino that's connected to the Raspberry Pi.
How to use
You can find the code for the arduino in the file arduino_code.ino.
The module only implement the exec function. It's automaticaly call by gladys when you put on/off the device.
The identifier is the off code for disable the plug. For exemple : 16129807
The on code is calculated, it's the off code +1 (the state value when you put on the device).
How to add a device on gladys and use it
Actualy, to create a device, you must create it in the database.
Create a device in the 'device' table with 'radioemitter' for service culumn value. For exemple :
| name | protocol | service | identifier | room | id | createdAt | updatedAt |
|---|---|---|---|---|---|---|---|
| Petite lumière salon | radio | radioemitter | 16129806 | 2 | 5 |
Create the devicetype correspondance with 'binary' (for binary device, min is 0 and max is 1) for the 'type' and the code af your radio device for the 'identifier'.
For exemple :
| type | tag | sensor | unit | min | max | display | device | id | createdAt | updatedAt | name | identifier |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| binary | lumiere_salon | 0 | 0 | 1 | 1 | 5 | 4 | lumiere_salon | 16129806 |
After that, go on Dladys, to the devices page and you can controle your device.