Rack::Unreloader is a code reloader for Rack. It speeds up application development by automatically reloading stale code so that you don’t have to restart your dev server every time you change a file.
Unlike most other code loading libraries for Rack, this one ensures that reloads are clean and idempotent by unloading relevant constants first, and it does so incrementally, only reloading the files that are modified.
gem install rack-unreloader
Source code is available on GitHub at github.com/jeremyevans/rack-unreloader
Before:
# config.ru require './app' run App
After:
# config.ru require 'rack/unreloader' Unreloader = Rack::Unreloader.new{App} Unreloader.require './app.rb' run Unreloader
Now, app.rb will be monitored for changes on each incoming HTTP request.
If changes are detected, Rack::Unreloader will unload all constants defined inside it and then re-require it before proceeding with the request.
By default, Rack::Unreloader unloads all constants defined in app.rb. That includes third-party libraries, like Roda or JSON in the example below:
# app.rb require 'roda' require 'json' class App < Roda ... end
Unloading these classes/modules isn’t just unnecessary, it’s dangerous. If your own code depends on them, your app will throw a NameError after reloading when it tries to access them.
To reload only subclasses of Roda (i.e. App), use the :subclasses option:
Rack::Unreloader.new(:subclasses=>%w'Roda'){App}
By default, Rack::Unreloader instances do not handle exceptions raised during reloading, so that it may be rescued elsewhere (e.g. manually or by middleware). You can use the :handle_reload_errors option to send the backtrace directly to the client as the HTTP response:
Rack::Unreloader.new(handle_reload_errors: true){App}
If your app.rb requires a models.rb file that you also want to get reloaded:
require 'roda' require './models.rb' class App < Roda route do |r| "Hello world!" end end
You can change app.rb from using:
require './models.rb'
to using:
Unreloader.require './models.rb'
The reason that the Rack::Unreloader instance is assigned to a constant in config.ru is to make it easy to add reloadable dependencies in this way.
It’s even a better idea to require this dependency manually in config.ru, before requiring app.rb:
require 'rack/unreloader' Unreloader = Rack::Unreloader.new(:subclasses=>%w'Roda Sequel::Model'){App} Unreloader.require './models.rb' Unreloader.require './app.rb' run Unreloader
This way, changing your app.rb file will not reload your models.rb file.
In general, you are only going to want to reload code in development mode. To simplify things, you can use rack-unreloader both in development and production, and just not have it reload in production by setting :reload to false if not in development:
dev = ENV['RACK_ENV'] == 'development' require 'rack/unreloader' Unreloader = Rack::Unreloader.new(:subclasses=>%w'Roda Sequel::Model', :reload=>dev){App} Unreloader.require './models.rb' Unreloader.require './app.rb' run(dev ? Unreloader : App)
By running the App instead of Unreloader in production mode, there is no performance penalty. The advantage of this approach is you can use Unreloader.require to require files regardless of whether you are using development or production mode.
This reloader also handles modules. Since modules do not have superclasses, if you are using the :subclasses option to specify specific subclasses, you need to specify the module name if you want to reload it:
Unreloader = Rack::Unreloader.new(:subclasses=>%w'MyModule'){App}
To correctly handle modules and superclasses, if a change is made to a module or superclass, you generally want to reload all classes that include the module or subclass the superclass, so they they pick up the change to the module or superclass.
You can specify the file dependencies when using rack-unreloader:
Unreloader.record_dependency('lib/module_file.rb', %w'models/mod1.rb models/mod2.rb')
If lib/module_file.rb is changed, rack-unreloader will reload models/mod1.rb and models/mod2.rb after reloading lib/module_file.rb.
You can provide directories when requiring dependencies. For example:
Unreloader.record_dependency('helpers', %w'app.rb')
will make it so the addition of any ruby files to the helpers directory will trigger a reload of app.rb, and future changes to any of those files will also trigger of reload of app.rb. Additionally, deleting any ruby files in the helpers directory will also trigger a reload of app.rb.
You can also use a directory as the second argument:
Unreloader.record_dependency('mod.rb', 'models')
With this, any change to mod.rb will trigger a reload of all ruby files in the models directory, even if such files are added later.
When using record_dependencies with a directory, you should also call require with that directory, as opposed to specifically requiring individual files inside the directory.
Rack::Unreloader handles classes split into multiple files, where there is a main file for the class that requires the other files that define the class. Assuming the main class file is app.rb, and other files that make up the class are in helpers:
# inside config.ru Unreloader.require 'app.rb' # inside app.rb Unreloader.require 'helpers' Unreloader.record_split_class(__FILE__, 'helpers')
If app.rb is changed or any of the ruby files in helpers is changed, it will reload app.rb and all of the files in helpers. This makes it so if you remove a method from one of the files in helpers, it will reload the entire class so that the method is no longer defined. Likewise, if you delete one of the files in helpers, it will reload the class so that the methods that were defined in that file will no longer be defined on the class.
Rack::Unreloader#require is a little different than Kernel#require in that it takes a file glob, not a normal require path. For that reason, you must specify the extension when requiring the file, and it will only look in the current directory by default:
Unreloader.require 'app.rb'
If you want to require a file in a different directory, you need to provide the full path:
Unreloader.require '/path/to/app.rb'
You can use the usual file globbing to load multiple files:
Unreloader.require 'models/*.rb'
If you want to load all files in a given directory you should just give the directory path:
Unreloader.require 'models'
The advantage for doing this is that new files added to the directory will be picked up automatically, and files deleted from the directory will be removed automatically. This applies to files in subdirectories of that directory as well.
The require method also supports a :delete_hook option. This option sets a hook that is called when the related file is deleted. This is useful if adding a new file or reloading an existing file will handle things correctly, but removing the file will not. One common case for this is when you have a shared data structure that is updated by the files, where adding or reloading the file will update the data structure, but deleting will not, and will leave stale entries in the data structure. You can use the :delete_hook option to remove the entries related to the file in the data structure:
Unreloader.require 'models', :delete_hook=>proc{|f| SHARED_HASH.delete(f)}
By default, Rack::Unreloader uses ObjectSpace before and after requiring each file that it monitors, to see which classes and modules were defined by the require. This is slow for large numbers of files. In general use it isn’t an issue as generally only a single file will be changed at a time, but it can significantly slow down startup when all files are being loaded at the same time.
If you want to speed things up, you can provide a block to Rack::Unreloader#require, which will take the file name, and should return the name of the constants or array of constants to unload. If you do this, Rack::Unreloader will no longer need to use ObjectSpace, which substantially speeds up startup. For example, if all of your models just use a capitalized version of the filename:
Unreloader.require('models'){|f| File.basename(f).sub(/\.rb\z/, '').capitalize}
In some cases, you may want to pass a block to require, but inside the block decide that instead of specifying the constants, ObjectSpace should be used to automatically determine the constants loaded. You can specify this by having the block return the :ObjectSpace symbol.
To further speed things up in development mode, or when only running a subset of tests, it can be helpful to autoload files instead of require them, so that if the related constants are not accessed, you don’t need to pay the cost of loading the related files. To enable autoloading, pass the :autoload option when creating the reloader:
Unreloader = Rack::Unreloader.new(autoload: true){App}
Then, you can call autoload instead of require:
Unreloader.autoload('models'){|f| File.basename(f).sub(/\.rb\z/, '').capitalize}
This will monitor the models directory for files, setting up autoloads for each file. After the file has been loaded, normal reloading will happen for the file. Note that for autoload, a block is required because the constant names are needed before loading the file to setup the autoload.
If the reload: false option is given when creating the reloader, autoloads will still be setup by autoload, but no reloading will happen. This can be useful when testing subsets of an application. When testing subsets of an application, you don’t need reloading, but you can benefit from autoloading, so parts of the application you are not testing are not loaded.
If you do not pass the :autoload option when creating the reloader, then calls to autoload will implicitly be transformed to calls to require. This makes it possible to use the same autoload call in all cases, and handle four separate scenarios:
-
Autoload then reload: Fast development mode startup, loading the minimum number of files, but reloading if those files are changed
-
Autoload without reload: Useful for faster testing of a subset of an application, so the untested subsets is not loaded.
-
Require then reload: Slower development mode startup, but have entire application loaded before accepting requests
-
Require without reload: Normal production/testing mode with nothing autoloaded or reloaded
While Rack::Unreloader is usually in the development of rack applications, it doesn’t depend on rack. You can just instantiate an instance of Unreloader and use it to handle reloading in any ruby application, just by using the require and record_dependency to set up the metadata, and calling reload! manually to reload the application.
Rack::Unreloader was derived from Padrino’s reloader. The Padrino-specific parts were removed, and it now requires the user manually specify which files to monitor. It has additional features, improvements, and bug fixes.
Unloading constants and reloading files has a ton of corner cases that this will not handle correctly. If it isn’t doing what you expect, add a logger:
Rack::Unreloader.new(:logger=>Logger.new($stdout)){App}
Unloading constants causes issues whenever references to the constant are cached anywhere instead of looking up the constant by name. This is fairly common, and using this library can cause a memory leak or unexpected behavior in such a case.
Approaches that load a fresh environment for every request (or a fresh environment anytime there are any changes) are going to be more robust than this approach, but probably slower. Be aware that you are trading robustness for speed when using this library.
Rack::Unreloader works correctly on Ruby 1.9.2+ and JRuby 9.1+.
MIT
Jeremy Evans <code@jeremyevans.net>