KLE PCB Generator

This script makes it easier to create your own keyboard with fully custom key layout. It reads a file exported from the online Keyboard Layout Editor and generates a KiCAD project from this, complete with schematic and layout. After manually finalizing the design you can generate the files a production service (such as OSH Park or Eurocircuits) needs to manufacture your PCB.

The generated schematic is pretty much complete and contains all key switches connected in rows and columns, a functional control circuit built around the ATmega32U4 (including external crystal, reset switch, programming header and a USB connector) and mounting holes. The layout is only partly routed, but contains all switches (including stabilizer mounting holes for keys that need it) in the correct position.

Features

Current klepcbgen features are:

Generate a project compatible with KiCad 5 and 6 (But check this first)
Use only standard KiCad libraries
Keys of different widths and/or heights
Add stabilizers to keys 2 units or more wide
Cherry MX switch mount
Limitation: layouts with at most 18 columns and 7 rows

Currently not supported are:

Keys with secondary width/height (So no ISO ENTER keys for now, sorry!)
Rotated keys
Vertical keys (e.g. numpad ENTER and "+")
Alps switches

Installation

Start by downloading and unzipping the code or by cloning the repository:

git clone https://github.com/jeroen94704/klepcbgen

Then install the required dependencies, using the following command:

pip install -r requirements.txt

(Note: On Windows, make sure to execute this command in a shell with admin rights)

Usage

Please read this wiki page for usage instructions.

Kicad 6

Additional instructions regarding Kicad 6 can be found here.

Future improvements

Core features:

Smarter options for rows/columns grouping, as the current approach does not allow for a full 104-key layout
Support foorprints with stabilizers for vertical keys (numpad enter and 0)
Add the option to use Alps footprints (Supported in KiCad as Matias switches)
Support ISO-ENTER
Support rotated keys

More advanced options:

A board outline compatible with swillkb's online Plate&Case Builder.
Support for easy generation of keyboard firmware.
Lighting: obviously RGB is all the rage, so I would like to add options to generate a PCB which includes lighting
Split layout: I'm a big fan of ergonomic/split layouts (I'm currently typing this on a Kinesis Freestyle Pro)
Wireless: Becaue cables are a nuisance.
Alternative control circuits: The ATmega32U4 is not the only option, and frankly doesn't have a lot of spare pins, e.g. for lighting

Donate

If you find this project useful a small donation is much appreciated (but by no means required or expected): https://ko-fi.com/jeroen94704

jeroen94704/klepcbgen