jfsimon1981
Chrysalide Engineering, Electrotechnic, Aviation, Numerics, Laboratory, C/C++ and electronics Founder Lecomptoirelectronique.fr Chrysalide-Engineering.com
Chrysalide EngineeringFrance
Pinned Repositories
1.3inch_LCD_HAT_code
Demo code for 1.3inch LCD display HAT for Raspberry Pi
2.11BSD
Original 2.11BSD Unix distribution with sources
4.4BSD-Lite2
4.4BSD Lite Release 2: last Unix operating system from Berkeley
A20-CAN-ISO
Galvanic insulated CAN dreiver for A20-OLinuXino Small Linux Computers
abefw-omap4plus
Adafruit-PCD8544-Nokia-5110-LCD-library
Arduino driver for PC8544, most commonly found in small Nokia 5110's
af_alg
small AF_ALG tests
AgonLight2-HvIO
High voltage optoisolated Four outputs and Four inputs and two Temperature sensor connectors for AgonLight2
archlinuxarm-olinuxino
ArchlinuxARM support for the Olimex Olinuxino boards
boolean
Simple boolean operations
jfsimon1981's Repositories
jfsimon1981/AgonLight2-HvIO
High voltage optoisolated Four outputs and Four inputs and two Temperature sensor connectors for AgonLight2
jfsimon1981/arduino_core_ch32
Core library for CH32duino
jfsimon1981/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
jfsimon1981/ch32v103
jfsimon1981/ch32v307
Including the SDK、HDK、Datasheet of RISC-V MCU CH32V307 and other relevant development materials
jfsimon1981/chrono
jfsimon1981/concurrency-ts2
C++ Concurrency TS 2
jfsimon1981/CWG
Core Working Group
jfsimon1981/draft
C++ standards drafts
jfsimon1981/ecosystem-is
Working Draft for a future C++ Ecosystem IS
jfsimon1981/EPFLXplore_ERC_HD
jfsimon1981/EPFLXplore_ROS_Course
jfsimon1981/EPFLXplore_XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project
jfsimon1981/EPFLXplore_XRE_moteus
Brushless servo and quadrupedal robot
jfsimon1981/ESP32-EVB
ESP32 WiFi / BLE Development board with Ethernet interface, Relays, microSD card
jfsimon1981/ESP32-POE
ESP32 IoT development board with 100Mb Ethernet and 802.3 Power Over Ethernet (POE)
jfsimon1981/ESP32-SBC-FabGL
ESP32-WROVER board working with FabGL library
jfsimon1981/Fluid-Sim
jfsimon1981/fundamentals-ts
The draft C++ Library Fundamentals Technical Specification
jfsimon1981/linuxcnc
LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3d printers, laser cutters, plasma cutters, robot arms, hexapods, and more.
jfsimon1981/LWG
Home of the official Library Working Group issues list
jfsimon1981/machinecontroller
jfsimon1981/modules-ecosystem-tr
The ISO C++ Modules Ecosystem Technical Report (METeR)
jfsimon1981/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
jfsimon1981/papers
ISO/IEC JTC1 SC22 WG21 paper scheduling and management
jfsimon1981/picorvd
GDB-compatible RISC-V Debugger for CH32V003 that runs on a Raspberry Pi Pico
jfsimon1981/RISC-V_ESC
ESC(Electronic Speed Controller) source code based on RISC-V CH32
jfsimon1981/SG20
Study Group 20: Education
jfsimon1981/transactional-memory-ts2
Transactional Memory TS2 2021, from NWIP to TS
jfsimon1981/u-boot-olinuxino
mirrored