I ended up buying this [$20 Raspberry Pi Case and Touch Screen] (http://www.amazon.com/OSOYOO-Display-Monitor-Transparent-Raspberry/dp/B013E0IJVE) thinking that configuration would be fairly easy. I was wrong. It took me a better part of a weekend to figure out. I put this together hoping to help someone else.
The boards should be fairly clearly marked on the back:
##V5 Installation
From the Terminal:
cd Documents
sudo wget https://github.com/jgamblin/OsoYooTFT/blob/master/LCD_show_v5.tar.gz
tar xzvf LCD_show_v5.tar.gz
To enable LCD:
cd LCD_show_v5
./LCD35_v35
To enable HDMI:
cd LCD_show_v5
./LCD_restore
##V4 Installation
From the Terminal:
cd Documents
sudo wget http://en.kedei.net/raspberry/v4/LCD_show_v4.tar.gz
tar xzvf LCD_show_v4.tar.gz
To enable LCD:
cd LCD_show_v4
./LCD35_v4
To enable HDMI:
cd LCD_show_v4
./LCD_hdmi
##V6 Installation
From the Terminal:
cd Documents
sudo wget http://en.kedei.net/raspberry/v6/LCD_show_v6.tar.gz
tar xzvf LCD_show_v6.tar.gz
To enable LCD:
cd LCD_show_v6
./LCD35_v6
To enable HDMI:
cd LCD_show_v6
./LCD_restore
##More Files There are [more files here] (http://en.kedei.net/raspberry/raspberry.html).
##Important Notice
I dont know what I am doing. This could break your system.