jgc/falco_sw_ard_tft

Issues

• Investigate random reset

  #21 opened 9 years ago by jgc
  0

• Move testdata to function

  #17 opened 9 years ago by jgc
  0

• Add additional warning symbols

  #9 opened 9 years ago by jgc
  0

• Add ability to receive setup data

  #19 opened 9 years ago by jgc
  0

• Ability to respond to request for display device information

  #20 opened 9 years ago by jgc
  0

• Add reset counter

  #22 opened 9 years ago by jgc
  0

• Add do not refresh screen to displayText

  #18 opened 9 years ago by jgc
  0

• Check for button press during displayGrid

  #16 opened 9 years ago by jgc
  0

• Add wire.transmission length validation

  #15 opened 9 years ago by jgc
  0

• Simplify temp reset code

  #12 opened 9 years ago by jgc
  0

• Add node level delayMode

  #11 opened 9 years ago by jgc
  0

• Add support for specifying text color and font size

  #8 opened 9 years ago by jgc
  1

• Right align warning text

  #14 opened 9 years ago by jgc
  0

• Temp reset causes display sequence issue

  #10 opened 9 years ago by jgc
  1

• Optimize data structures and code size

  #6 opened 9 years ago by jgc
  0

• Replace delay with timers to improve screen refresh etc

  #13 opened 9 years ago by jgc
  0

• Stop message flickering and screen clear on new wire 'text' message

  #7 opened 9 years ago by jgc
  0

• Add ability to suppress / add steps to the standard display sequence

  #5 opened 9 years ago by jgc
  0

• Add ability to specify a delay for wire 'text' messages by blocking non text stuff

  #4 opened 9 years ago by jgc
  0

• Add wire 'text' message

  #1 opened 9 years ago by jgc
  0

• Add wire 'missing data' message

  #2 opened 9 years ago by jgc
  0

• Drop out of grid displays if text message received

  #3 opened 9 years ago by jgc
  1