** May contain comments and commands from old project code **
Getting Started (Windows):
-
Plug in serial module to power on device
-
Plug in PICkit 3
-
Download and install MPLAB for C Standard-Eval Version here: http://www.microchip.com/Developmenttools/ProductDetails.aspx?PartNO=SW006011
-
Open Project in MPLABX (make sure C18 compiler and PICkit 3 are selected) and click "Make and Program Device"
-
LED will blink upon first boot or after reset button is pressed
-
Determine COM port used by serial device by opening device manager and looking under "Ports (COM & LPT)"
-
Open serial program such as Putty, click "serial" radio button, enter correct COM port, and press "Open" to see message from PIC