This is Net-SNMP module for monitoring APC UPSes without SNMP support. It reads output from apcupsd (/sbin/apcaccess) and writes it into appropriate OIDs like UPSes with built-in SNMP support.
To load this into a running agent with embedded Perl support turned on, simply put the following line to your snmpd.conf file:
perl do "/path/to/mod_apcupsd.pl";
Net-snmp must be compiled with Perl support and apcupsd properly configured and running!
Try snmpwalk -v 2c -c public <host> .1.3.6.1.4.1.318.1.1.1 and you should
get something like:
$ snmpwalk -v 2c -c public localhost .1.3.6.1.4.1.318.1.1.1
PowerNet-MIB::upsBasicIdentModel.0 = STRING: "Back-UPS RS 500"
PowerNet-MIB::upsBasicIdentName.0 = STRING: "grid"
PowerNet-MIB::upsAdvIdentFirmwareRevision.0 = STRING: "30.j2.I USB FW:j2"
PowerNet-MIB::upsAdvIdentSerialNumber.0 = STRING: "BB0314005xxx"
PowerNet-MIB::upsBasicBatteryTimeOnBattery.0 = Timeticks: (0) 0:00:00.00
PowerNet-MIB::upsBasicBatteryLastReplaceDate.0 = STRING: "2009-02-26"
PowerNet-MIB::upsAdvBatteryCapacity.0 = Gauge32: 100
PowerNet-MIB::upsAdvBatteryTemperature.0 = Gauge32: 29
PowerNet-MIB::upsAdvBatteryRunTimeRemaining.0 = Timeticks: (190200) 0:31:42.00
PowerNet-MIB::upsAdvBatteryNominalVoltage.0 = INTEGER: 12
PowerNet-MIB::upsAdvBatteryActualVoltage.0 = INTEGER: 13
PowerNet-MIB::upsAdvInputLineVoltage.0 = Gauge32: 228
PowerNet-MIB::upsAdvInputFrequency.0 = Gauge32: 49
PowerNet-MIB::upsAdvInputLineFailCause.0 = INTEGER: blackout(4)
PowerNet-MIB::upsAdvOutputVoltage.0 = Gauge32: 230
PowerNet-MIB::upsAdvOutputLoad.0 = Gauge32: 22
PowerNet-MIB::upsAdvConfigRatedOutputVoltage.0 = INTEGER: 230
PowerNet-MIB::upsAdvConfigHighTransferVolt.0 = INTEGER: 254
PowerNet-MIB::upsAdvConfigLowTransferVolt.0 = INTEGER: 198
PowerNet-MIB::upsAdvConfigAlarm.0 = INTEGER: atLowBattery(2)
PowerNet-MIB::upsAdvConfigMinReturnCapacity.0 = INTEGER: 0
PowerNet-MIB::upsAdvConfigSensitivity.0 = INTEGER: high(4)
PowerNet-MIB::upsAdvConfigLowBatteryRunTime.0 = Timeticks: (24000) 0:04:00.00
PowerNet-MIB::upsAdvConfigReturnDelay.0 = Timeticks: (0) 0:00:00.00
PowerNet-MIB::upsAdvConfigShutoffDelay.0 = Timeticks: (0) 0:00:00.00
PowerNet-MIB::upsAdvTestDiagnosticSchedule.0 = INTEGER: unknown(1)
PowerNet-MIB::upsAdvTestDiagnosticsResults.0 = INTEGER: 0
or if you like numeric OIDs:
snmpwalk -v 2c -c public -On localhost .1.3.6.1.4.1.318.1.1.1
.1.3.6.1.4.1.318.1.1.1.1.1.1.0 = STRING: "Back-UPS RS 500"
.1.3.6.1.4.1.318.1.1.1.1.1.2.0 = STRING: "grid"
.1.3.6.1.4.1.318.1.1.1.1.2.1.0 = STRING: "30.j2.I USB FW:j2"
.1.3.6.1.4.1.318.1.1.1.1.2.3.0 = STRING: "BB0314005xxx"
.1.3.6.1.4.1.318.1.1.1.2.1.2.0 = Timeticks: (0) 0:00:00.00
.1.3.6.1.4.1.318.1.1.1.2.1.3.0 = STRING: "2009-02-26"
.1.3.6.1.4.1.318.1.1.1.2.2.1.0 = Gauge32: 100
.1.3.6.1.4.1.318.1.1.1.2.2.2.0 = Gauge32: 29
.1.3.6.1.4.1.318.1.1.1.2.2.3.0 = Timeticks: (184800) 0:30:48.00
.1.3.6.1.4.1.318.1.1.1.2.2.7.0 = INTEGER: 12
.1.3.6.1.4.1.318.1.1.1.2.2.8.0 = INTEGER: 13
.1.3.6.1.4.1.318.1.1.1.3.2.1.0 = Gauge32: 228
.1.3.6.1.4.1.318.1.1.1.3.2.4.0 = Gauge32: 49
.1.3.6.1.4.1.318.1.1.1.3.2.5.0 = INTEGER: blackout(4)
.1.3.6.1.4.1.318.1.1.1.4.2.1.0 = Gauge32: 230
.1.3.6.1.4.1.318.1.1.1.4.2.3.0 = Gauge32: 21
.1.3.6.1.4.1.318.1.1.1.5.2.1.0 = INTEGER: 230
.1.3.6.1.4.1.318.1.1.1.5.2.2.0 = INTEGER: 254
.1.3.6.1.4.1.318.1.1.1.5.2.3.0 = INTEGER: 198
.1.3.6.1.4.1.318.1.1.1.5.2.4.0 = INTEGER: atLowBattery(2)
.1.3.6.1.4.1.318.1.1.1.5.2.6.0 = INTEGER: 0
.1.3.6.1.4.1.318.1.1.1.5.2.7.0 = INTEGER: high(4)
.1.3.6.1.4.1.318.1.1.1.5.2.8.0 = Timeticks: (24000) 0:04:00.00
.1.3.6.1.4.1.318.1.1.1.5.2.9.0 = Timeticks: (0) 0:00:00.00
.1.3.6.1.4.1.318.1.1.1.5.2.10.0 = Timeticks: (0) 0:00:00.00
.1.3.6.1.4.1.318.1.1.1.7.2.1.0 = INTEGER: unknown(1)
.1.3.6.1.4.1.318.1.1.1.7.2.3.0 = INTEGER: 0
You can also query only one OID:
$ snmpwalk -v 2c -c public grid .1.3.6.1.4.1.318.1.1.1.2.2.3.0
PowerNet-MIB::upsAdvBatteryRunTimeRemaining.0 = Timeticks: (190200) 0:31:42.00
-
Reimplement snmp_handler to correctly support walking through subtrees of .1.3.6.1.4.1.318.1.1.1 (e.g. .1.3.6.1.4.1.318.1.1.1.2). Currently it can list subtrees only on .1.3.6.1.4.1.318.1.1.1 and leafs.
-
Add remaining OIDs that apcupsd could get data for. I included only OIDs for my APC Back-UP RS 500.
-
Implement support for setting values and traps.
Feel free to contribute! I have no intention in future development.
-
Download PowerNet (APC) MIB file: powernet401.mib.
-
I'm not skilled Perl programmer, this is my first Perl script I ever wrote. So if you find something weird in it, please let me know about it and fix it. However it's working perfectly fine for me, so I hope it's ok.