/p-net

PROFINET device stack for embedded devices

Primary LanguageCOtherNOASSERTION

P-net

Profinet device stack for embedded systems

Web resources

Build Status CodeQL

Key features

  • Profinet v2.43

    • Conformance Class A and B
    • Real Time Class 1
    • Multiple Ethernet ports
  • Easy to use

    • Extensive documentation and instructions on how to get started.
    • Build and run sample application on Raspberry Pi in 30 minutes.
  • Portable

    • Written in C.
    • Linux, RTOS or bare metal.
    • Sources for supported port layers provided.

The RT-Labs Profinet stack p-net is used for Profinet device implementations. It is easy to use and provides a small footprint. It is especially well suited for embedded systems where resources are limited and efficiency is crucial. The stack is supplied with full sources including porting layers and a sample application.

Also C++ (any version) is supported for application development.

The main requirement on the platform is that it can send and receive raw Ethernet Layer 2 frames.

This software is dual-licensed, with GPL version 3 and a commercial license. If you intend to use this stack in a commercial product, you likely need to buy a license. See LICENSE.md for more details.

Getting started

See the tutorial in the documentation: https://rt-labs.com/docs/p-net/tutorial.html

Note that you need to include submodules when cloning:

git clone --recurse-submodules https://github.com/rtlabs-com/p-net.git

Features

  • Multiple Ethernet ports (for Linux only, so far)
  • TCP/IP
  • LLDP
  • SNMP
  • RT (real-time)
  • Address resolution
  • Parameterization
  • Process IO data exchange
  • Alarm handling
  • Configurable number of modules and sub-modules
  • Bare-metal or OS
  • Porting layer provided
  • Supports I&M0 - I&M4. The I&M data is supported for the device, but not for individual modules.
  • Shared device (connection to multiple controllers)

Limitations

  • This is a device stack, which means that the IO-controller/master/PLC side is not supported.
  • No media redundancy (No MRP support)
  • Legacy startup mode is not fully implemented
  • No support for RT_CLASS_UDP
  • No support for DHCP
  • No fast start-up
  • No MC multicast device-to-device
  • No support for shared inputs
  • Supports only full connections, not the limited "DeviceAccess" connection type.
  • No iPar (parameter server) support
  • No support for time synchronization
  • No UDP frames at alarm (just the default alarm mechanism is implemented)
  • No ProfiDrive or ProfiSafe profiles.

Requirements

The platform must be able to send and receive raw Ethernet Layer 2 frames, and the Ethernet driver must be able to handle full size frames. It should also avoid copying data, for performance reasons.

  • cmake 3.14 or later

For Linux:

  • gcc 4.6 or later
  • See the "Real-time properties of Linux" page in the documentation on how to improve Linux timing

For rt-kernel:

  • Workbench 2020.1 or later

An example of microcontroller we have been using is the Infineon XMC4800, which has an ARM Cortex-M4 running at 144 MHz, with 2 MB Flash and 352 kB RAM. It runs rt-kernel, and we have tested it with 9 Profinet slots each having 8 digital inputs and 8 digital outputs (one bit each). The values are sent and received each millisecond (PLC watchdog setting 3 ms).

Dependencies

Some of the platform-dependent parts are located in the OSAL repository and the cmake-tools repository.

Those are downloaded automatically during install.

The p-net stack contains no third party components. Its external dependencies are:

  • C-library
  • An operating system (if used)
  • For conformance class B you need an SNMP implementation. On Linux is net-snmp (BSD License) used http://www.net-snmp.org

Tools used for building, testing and documentation (not shipped in the resulting binaries):

Contributions

Contributions are welcome. If you want to contribute you will need to sign a Contributor License Agreement and send it to us either by e-mail or by physical mail. More information is available on https://rt-labs.com/contribution.