jj1bdx/airspy-fmradion

Issues

• Build issue on Arch

  #78 opened 8 months ago by zygmund2000
  9

• Airspy HF+ Firmware R4.0.8 and libairspyhf 1.8 support

  #77 opened 8 months ago by jj1bdx
  11

• MP3 output support via libsndfile

  #47 opened 8 months ago by jj1bdx
  6

• Testing on Raspberry Pi OS (64bit Lite / bookworm)

  #69 opened 9 months ago by jj1bdx
  3

• VOLK 3.1.0 does not work on Ubuntu 22.04.3 x86_64 with airspy-fmradion 20231212-1

  #42 opened a year ago by jj1bdx
  7

• fldigi stops after a few seconds while receiving audio from airspy-fmradion via snd-aloop

  #59 opened a year ago by EricFROL
  14

• clang-tidy warnings as of 20240106

  #65 opened a year ago by jj1bdx
  0

• Further speedup on ARM CPUs

  #51 opened a year ago by jj1bdx
  0

• AM/CW audio output clips

  #49 opened a year ago by jj1bdx
  2

• Smaller latency for CW/SSB/WSPR reception

  #48 opened a year ago by jj1bdx
  0

• `volk_32fc_x2_s32fc_multiply_conjugate_add_32fc' is deprecated on VOLK 3.1.0

  #41 opened a year ago by jj1bdx
  8

• No major improvement: using PortAudio callback to reduce output latency

  #40 opened a year ago by jj1bdx
  4

• Specifying duration to record + audio out question

  #39 opened a year ago by jcdoster
  1

• Alternative FIR filter design software is needed

  #36 opened 3 years ago by jj1bdx
  2

• Install on Fedora 37

  #38 opened 2 years ago by jcdoster
  2

• Best SDR device to reduce interference?

  #37 opened 2 years ago by trs79
  1

• libusb-1.0.25 on macOS 12.2 causes segfault when stopping the code with SIGINT or SIGTERM with Airspy HF+ Discovery

  #35 opened 3 years ago by jj1bdx
  5

• Error : this file format does not support pipe write.

  #34 opened 3 years ago by Haz3lnut
  3

• Exit on Write Error??

  #11 opened 5 years ago by montgomeryb
  6

• Reorganize README.md

  #28 opened 3 years ago by jj1bdx
  1

• Feature requst - MPX output

  #33 opened 4 years ago by zygmund2000
  0

• CAT / Hamlib control

  #31 opened 4 years ago by jj1bdx
  1

• Turning off AGC / fixed IF and AF gain

  #32 opened 4 years ago by jj1bdx
  0

• Multi-channel decoding (new feature)

  #1 opened 4 years ago by iroks
  13

• SoapySDR support (New Feature)

  #2 opened 4 years ago by nmaster2042
  2

• stereo decoder ? (New feature)

  #24 opened 4 years ago by jpuigs
  4

• Audio rate configuration issue / OOM on Ras Pi 4

  #26 opened 4 years ago by Akito01
  9

• Is this compatible with Raspberry Pi 3?

  #27 opened 4 years ago by hjf
  2

• Dropping of received data observed in v0.8.4

  #25 opened 4 years ago by jj1bdx
  4

• VOLK (libvolk) optimization

  #16 opened 5 years ago by jj1bdx
  11

• Raspberry Pi evaluation

  #9 opened 5 years ago by jj1bdx
  6

• Raspberry Pi 3 Model B Rev 1.2, runs but get alsa under-runs

  #23 opened 5 years ago by wa2zkd
  3

• RPi 3 install troubles

  #22 opened 5 years ago by wa2zkd
  3

• sample rate error at runtime

  #21 opened 5 years ago by wa2zkd
  3

• Problems with make

  #20 opened 5 years ago by wa2zkd
  2

• Possible to change fixed sample rate of 48000?

  #19 opened 5 years ago by trs79
  5

• FM multipath filter coefficient optimization

  #7 opened 5 years ago by jj1bdx
  4

• VOLK (libvolk) for vector computing

  #10 opened 5 years ago by jj1bdx
  4

• About conditional expression.

  #13 opened 5 years ago by bstalk
  1

• AM AGC ducking

  #8 opened 5 years ago by jj1bdx
  3

• Resampling efficiency, and why not choosing 32kHz sampling rate

  #6 opened 5 years ago by touil
  1

• Setting sample rates

  #5 opened 5 years ago by touil
  1

• tweak for Airspy HF usage text

  #4 opened 5 years ago by csylvain
  1

• Cannot change sample rate

  #3 opened 5 years ago by montgomeryb
  4