/mod-mongo-persistor

MongoDB Module

Primary LanguageJavaOtherNOASSERTION

MongoDB Persistor

This module allows data to be saved, retrieved, searched for, and deleted in a MongoDB instance. MongoDB is a great match for persisting vert.x data since it natively handles JSON (BSON) documents. To use this module you must have a MongoDB instance running on your network.

This is a worker module and must be started as a worker verticle.

Dependencies

This module requires a MongoDB server to be available on the network.

Name

The module name is mongo-persistor.

Configuration

The mongo-persistor module takes the following configuration:

{
    "address": <address>,
    "host": <host>,
    "port": <port>,
    "db_name": <db_name>    
}

For example:

{
    "address": "test.my_persistor",
    "host": "192.168.1.100",
    "port": 27000
    "db_name": "my_db"
}        

Let's take a look at each field in turn:

  • address The main address for the module. Every module has a main address. Defaults to vertx.mongopersistor.
  • host Host name or ip address of the MongoDB instance. Defaults to localhost.
  • port Port at which the MongoDB instance is listening. Defaults to 27017.
  • db_name Name of the database in the MongoDB instance to use. Defaults to default_db.

Operations

The module supports the following operations

Save

Saves a document in the database.

To save a document send a JSON message to the module main address:

{
    "action": "save",
    "collection": <collection>,
    "document": <document>
}     

Where:

  • collection is the name of the MongoDB collection that you wish to save the document in. This field is mandatory.
  • document is the JSON document that you wish to save.

An example would be:

{
    "action": "save",
    "collection": "users",
    "document": {
        "name": "tim",
        "age": 1000,
        "shoesize": 3.14159,
        "username": "tim",
        "password": "wibble"
    }
}  

When the save complete successfully, a reply message is sent back to the sender with the following data:

{
    "status": "ok"
}

The reply will also contain a field _id if the document that was saved didn't specifiy an id, this will be an automatically generated UUID, for example:

{
    "status": "ok"
    "_id": "ffeef2a7-5658-4905-a37c-cfb19f70471d"
}

If you save a document which already possesses an _id field, and a document with the same id already exists in the database, then the document will be updated.

If an error occurs in saving the document a reply is returned:

{
    "status": "error",
    "message": <message>
}

Where message is an error message.

Update

Updates a document in the database. Uses the Mongodb update function: http://www.mongodb.org/display/DOCS/Updating

To update a document send a JSON message to the module main address:

{
    "action": "update",
    "collection": <collection>,
    "criteria": {
        <criteria>
    },
    "objNew" : {
        <objNew>
    },
    upsert : <upsert>
    multi: <multi>
}  

Where:

  • collection is the name of the MongoDB collection that you wish to save the document in. This field is mandatory.

An example would be:

{
    "action": "update",
    "collection": "users",
    "criteria": {
        "_id": "tim",
    },
    objNew : {
        $inc: {
            age: 30
        }
     },
    upsert : true,
    multi : false
}

Find

Finds matching documents in the database.

To find documents send a JSON message to the module main address:

{
    "action": "find",
    "collection": <collection>,
    "matcher": <matcher>,
    "keys": <keys>,
    "skip": <offset>,
    "limit": <limit>,
    "batch_size": <batch_size>
}     

Where:

  • collection is the name of the MongoDB collection that you wish to search in in. This field is mandatory.
  • matcher is a JSON object that you want to match against to find matching documents. This obeys the normal MongoDB matching rues.
  • keys is an optional JSON object that contains the fields that should be returned for matched documents. See MongoDB manual for more information. Example: { "name": 1 } will only return objects with _id and the name field
  • skip is a number which determines the number of documents to skip. This is optional. By default no documents are skipped.
  • limit is a number which determines the maximum total number of documents to return. This is optional. By default all documents are returned.
  • batch_size is a number which determines how many documents to return in each reply JSON message. It's optional and the default value is 100. Batching is discussed in more detail below.

An example would be:

{
    "action": "find",
    "collection": "orders",
    "matcher": {
        "item": "cheese"
    }
}  

This would return all orders where the item field has the value cheese.

When the find complete successfully, a reply message is sent back to the sender with the following data:

{
    "status": "ok",
    "results": <results>
}   

Where results is a JSON array containing the results of the find operation. For example:

{
    "status": "ok",
    "results": [
        {
            "user": "tim",
            "item": "cheese",
            "total": 123.45
        },
        {
            "user": "bob",
            "item": "cheese",
            "total": 12.23
        },
        {
            "user": "jane",
            "item": "cheese",
            "total": 50.05
        }
    ]
}

If an error occurs in finding the documents a reply is returned:

{
    "status": "error",
    "message": <message>
}

Where message is an error message.

If you would like to paginate your result :

{
    "action": "find",
    "collection": "orders",
    "skip"  : 10,
    "limit" : 10,
    "matcher": {}
}

You decide to display 10 documents per page. This message will retrieve second page.

Equivalence in mongoDB:

db.order.find().skip(10).limit(10)

Count

Count all matching document in the database.

To count a document send a JSON message to the module main address:

{
    "action": "count",
    "collection": <collection>,
    "matcher": <matcher>
}

When the count complete successfully, a reply message is sent back to the sender with the following data:

{
     "status": "ok",
     "count" : <number>
}

Batching

If a find returns many documents we do not want to load them all up into memory at once and send them in a single JSON message since this could result in the server running out of RAM.

Instead, if there are more than batch_size documents to be found, the module will send a maxium of batch_size documents in each reply, and send multiple replies.

When you receive a reply to the find message containing batch_size documents the status field of the reply will be set to more-exist if there are more documents available.

To get the next batch of documents you just reply to the reply with an empty JSON message, and specify a reply handler in which to receive the next batch.

For instance, in JavaScript you might do something like:

function processResults(results) {
    // Process the data
}

function createReplyHandler() {
    return function(reply, replier) {
        // Got some results - process them
        processResults(reply.results);
        if (reply.status === 'more-exist') {
            // Get next batch
            replier({}, createReplyHandler());
        }
    }
}

// Send the find request
eb.send('foo.myPersistor', {
    action: 'find',
    collection: 'items',
    matcher: {}        
}, createReplyHandler());

If there is more data to be requested and you do not reply to get the next batch within a timeout (10 seconds), then the underlying MongoDB cursor will be closed, and any further attempts to request more will fail.

Find One

Finds a single matching document in the database.

To find a document send a JSON message to the module main address:

{
    "action": "findone",
    "collection": <collection>,
    "matcher": <matcher>,
    "keys": <keys>
}     

Where:

  • collection is the name of the MongoDB collection that you wish to search in in. This field is mandatory.
  • matcher is a JSON object that you want to match against to find a matching document. This obeys the normal MongoDB matching rues.
  • keys is an optional JSON object that contains the fields that should be returned for matched documents. See MongoDB manual for more information. Example: { "name": 1 } will only return objects with _id and the name field

If more than one document matches, just the first one will be returned.

An example would be:

{
    "action": "findone",
    "collection": "items",
    "matcher": {
        "_id": "ffeef2a7-5658-4905-a37c-cfb19f70471d"
    }
}  

This would return the item with the specified id.

When the find complete successfully, a reply message is sent back to the sender with the following data:

{
    "status": "ok",
    "result": <result>
}       

If an error occurs in finding the documents a reply is returned:

{
    "status": "error",
    "message": <message>
}

Where message is an error message.

Delete

Deletes a matching documents in the database.

To delete documents send a JSON message to the module main address:

{
    "action": "delete",
    "collection": <collection>,
    "matcher": <matcher>
}     

Where:

  • collection is the name of the MongoDB collection that you wish to delete from. This field is mandatory.
  • matcher is a JSON object that you want to match against to delete matching documents. This obeys the normal MongoDB matching rues.

All documents that match will be deleted.

An example would be:

{
    "action": "delete",
    "collection": "items",
    "matcher": {
        "_id": "ffeef2a7-5658-4905-a37c-cfb19f70471d"
    }
}  

This would delete the item with the specified id.

When the find complete successfully, a reply message is sent back to the sender with the following data:

{
    "status": "ok",
    "number": <number>
}       

Where number is the number of documents deleted.

If an error occurs in finding the documents a reply is returned:

{
    "status": "error",
    "message": <message>
}

Where message is an error message.