Suricata Verification Tests
These are tests that run Suricata with a specific configuration and/or inputs and verify the outputs.
Running All Tests
From your Suricata source directory run:
../path/to/suricata-verify/run.py
Or to run a single test:
../path/to/suricata-tests/run.py TEST-NAME
Adding a New Test
-
Create a directory that is the name of the new test.
-
Copy a single pcap file into the test directory. It must end in ".pcap".
This is enough for a basic test that will run Suricata over the pcap testing for a successful exit code.
-
Optional: Create a suricata.yaml in the test directory.
Its usually OK to just add the bits of YAML required to enable features for the test.
If the test directory does not include a suricata.yaml, the one found in your build directory will be used.
-
Add any rules required to ${dir}/test.rules.
-
Add a test.yaml descriptor file to add further control to your tests such as restricting features required for the test, and validating output.
Example test.yaml
requires:
# Require a minimum version of Suricata.
min-version: 4.1.0
# Require that the Suricata version be less than a version.
lt-version: 6
# Test is only for this version. For example, 4.0 would match any 4.0
# release, but 4.0.3 would only match 4.0.3.
version: 4.0
# Require the presence of specific features.
features:
# Restrict the test to builds with HAVE_LUA.
- HAVE_LUA
# Require that one or more files exist in the Suricata source directory
files:
- src/detect-ipaddr.c
# Don't require a pcap file to be present. By default a test will be skipped
# if there is no pcap file in the test directory. Not applicable if a
# command is provided.
pcap: false
# Run the script and only continue with the test if the script exists
# successfully.
script:
- command1
- command2
- ...
# Require the output of a Python expression to be true. For example,
# this will run on all platforms other than win32.
lambda: "sys.platform != win32"
skip:
# Skip a test if a feature is present, with a message that is logged.
- feature: RUST
msg: eve dns v1 not supported by rust
# Add additional arguments to Suricata.
args:
- --set stream.reassembly.depth=0
# Override the default command. This is also an example of how it can
# be broken up over multiple lines for readability. If providing the command
# all arguments must be provided as part of the command.
command: |
${SRCDIR}/src/suricata -T -c ${TEST_DIR}/suricata.yaml -vvv \
-l ${TEST_DIR}/output --set default-rule-path="${TEST_DIR}"
# Retry a test 3 more times on failure. Some tests are subject to
# timing errors on CI systems and this can help filter out the noise
# of tests that fail in such environments. By default, tests are only
# run once.
retry: 3
# Execute Suricata with the test parameters this many times. All checks will
# done after each iteration.
count: 10
pre-check: |
# Some script to run before running checks.
cp eve.json eve.json.bak
# Provide a pcap filename. A falsey value like false or empty is equivalent to setting
# "pcap: false" in the requires section.
pcap: input.pcap
# Test for a specific exit code. By default a test will fail if the
# exit code is anything other than 0, however sometimes we may be
# testing for failure.
exit-code: 1
checks:
# A verification filter that is run over the eve.json. Multiple
# filters may exist and all must pass for the test to pass.
- filter:
# Requires that apply just to this check. Has all the same options
# as the test level requires above.
requires:
features:
- HTTP2_DECOMPRESSION
# The number of records this filter should match.
count: 1
# The fields to match on.
match:
# Example match on event_type:
event_type: alert
# Example match on array item:
alert.metadata.tag[0]: "tag1"
# Example match on the length of an array.
alert.metadata.tag.__len: 3
# Check that a field exists:
has-key: alert.rule
# Check that a field does not exist:
not-has-key: flow
- shell:
# A simple shell check. If the command exits with a non-0 exit code the
# check will fail. The script is run in the output directory of the
# test.
args: grep "GPL ATTACK_RESPONSE" fast.log
- shell:
# A shell check that also tests the output of the command.
args: cat fast.log | wc -l | xargs
expect: 1
- file-compare:
# A check that compares two files
filename: datasets.csv
expected: expected/datasets.csv
Adding a new test the automated way: createst
Createst is a script to create a test directory with test.yaml for a given PCAP. This needs to be run from a valid Suricata source directory.
Usage
usage: createst.py [-h] [--output-path <output-path>] [--eventtype-only]
[--allow-events [ALLOW_EVENTS]] [--rules <rules-file>]
[--strictcsums] [--min-version <min-version>]
[--midstream]
<test-name> <pcap-file>
Create tests with a given PCAP. Execute the script from a valid Suricata source
directory.
positional arguments:
<test-name> Name of the test folder
<pcap-file> Path to the PCAP file
optional arguments:
-h, --help show this help message and exit
--rules <rules-path>
Path to rules file (optional)
--output-path <output-path>
Path to the folder where generated test.yaml should be
put
--eventtype-only Create filter blocks based on event types only
This means the subfields of the event in the eve log
will not be added to the test.yaml file
--allow-events [ALLOW_EVENTS]
Create filter blocks for the specified events
Events must be comma-separated only
This means that just the events listed will be checked
against in the test
--strictcsums Strictly validate checksum
--midstream Allow midstream session pickups
--min-version <min-version>
Adds a global minimum required version
--version <version> Adds a global version requirement
--cfg <suricata.yaml> Add a suricata.yaml to the test
--features [FEATS] Required features (comma separated list)
Examples
The only mandatory arguments for createst.py are the test name and the pcap
file. These examples show how some of the optional arguments can be used.
Example 1
Create a Suricata-verify test named test-01 that runs over a pcap file called
input.pcap and that requires strict checksums, filters only on the event-types
and uses no Suricata rules:
../suricata-verify/createst.py --strictcsums --eventtype-only test-01 input.pcap
Example 2
Create a Suricata-verify test named test-02 that runs over a pcap file called
input.pcap, only checks for http, alert and flow events, and
uses a rules file located in another test in the same suricata-verify folder.
It also doesn't require strict checksums and will run only for versions 6 and
newer:
../suricata-verify/createst.py --min-version 6 --allow-events http,alert,flow \
--rules ../suricata-verify/tests/no-payload-output/test.rules test-02 input.pcap
Add Required Features
../suricata-verify/createst.py --features HAVE_LUA
../suricata-verify/createst.py --features HAVE_LUA,AF_PACKET
The features are taken from the Features: line in suricata --build-info.