Pinned Repositories
autologger
autologger_IPMP
Special log collector version for IPMP team
charts
Bitnami Helm Charts
GyverMatrixWiFi
Адресная матрица на NodeMCU с управлением по WiFi
home_meteo_station
humidifier
ESP8266 controller for Polaris PUH 5304 air humidifier
IRremoteESP8266
Infrared remote library for ESP8266: send and receive infrared signals with multiple protocols. Based on: https://github.com/shirriff/Arduino-IRremote/
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
motor-on-roller-blind-ws
WebSocket and MQTT supported device code for the roller blind. As rework of the design and code is on its way there won't be any updates to this repository
sim_cards
jnt2007's Repositories
jnt2007/motor-on-roller-blind-ws
WebSocket and MQTT supported device code for the roller blind. As rework of the design and code is on its way there won't be any updates to this repository
jnt2007/autologger
jnt2007/autologger_IPMP
Special log collector version for IPMP team
jnt2007/charts
Bitnami Helm Charts
jnt2007/GyverMatrixWiFi
Адресная матрица на NodeMCU с управлением по WiFi
jnt2007/home_meteo_station
jnt2007/humidifier
ESP8266 controller for Polaris PUH 5304 air humidifier
jnt2007/IRremoteESP8266
Infrared remote library for ESP8266: send and receive infrared signals with multiple protocols. Based on: https://github.com/shirriff/Arduino-IRremote/
jnt2007/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
jnt2007/sim_cards
jnt2007/Tasmota
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
jnt2007/version_site