Issues
- 3
- 0
- 4
Problem reading SD Card
#44 opened by jeff-azevedo - 2
WARNING: Failed to communicate with the flash chip, read/write operations will fail. Try checking the chip connections or removing any other hardware connected to IOs.
#42 opened by twertybog - 1
Discord (again)
#41 opened by MathewsCarioca - 2
Booting in Downloading Mode
#38 opened by rmivdc - 6
"Unexpected error: ESP is not in flash boot mode. If your board has a flashing pin, try again while keeping it pressed."
#36 opened by ronaldosegundojr - 2
Please add RFQuack config
#18 opened by bazuchan - 1
- 1
Sketch error
#26 opened by Antix1979 - 1
nrf24 pins
#31 opened by daci5455 - 2
targzfs not declared in this scope ?
#32 opened by jamesmac10 - 1
radio is off frequency by 50khz
#34 opened by mikebanz - 6
Cannot upload
#35 opened by in4matix - 5
SD Card Not Recognized
#37 opened by ronaldosegundojr - 1
Can't scan
#39 opened by hhhomega - 2
- 2
Discord Link
#28 opened by wpa-2 - 5
Evil crow web page not loading on 192.168.4.1
#33 opened by NicheSkill - 3
Cannot view the Evil Crow's SSID from cell phones.
#29 opened by trigat - 7
[Proposal] Add support to Flipper Zero .sub files
#24 opened by iordic - 0
Non-security usage GPR
#27 opened by rcdemuth - 0
Defaults for rxconfig
#23 opened by buttim - 0
for loop exceeds array bounds
#22 opened by buttim - 0
ECRFv2 with LDO desoldered.
#21 opened by kazz2020 - 0
Bad battery connection.
#20 opened by kazz2020 - 2
Hi!
#11 opened by Zavulonfeb28 - 0
- 1
Feature Request: Brute Force
#16 opened by Commander-Crash - 1
Crashing
#17 opened by Commander-Crash - 1
RFcat
#15 opened by Commander-Crash - 0
Please Update readme
#14 opened by Commander-Crash - 2
error Architecture or board not supported
#12 opened by blackndoor - 2
Hi Dear,
#1 opened by HellGateCorp - 2
Hi Joel
#9 opened by wisnusatriyo - 0
- 1
Compile issue - v1.3.2 - SD.h
#7 opened by hsiboy - 0
Feature Request: Spectrum Analyzer
#6 opened by ResistanceIsUseless - 0
- 0
- 0