joethezombie/Amiga-1000-Rejuvenator

Issues

• Video Slot

  #11 opened 3 months ago by reinauer
  2

• bom and schematic don't match

  #8 opened 3 years ago by ogg1e
  4

• PCB bit to wide in PSU direction

  #10 opened 3 years ago by olDirdey
  5

• Holes for Battery to small

  #9 opened 3 years ago by olDirdey
  2

• Replace 28MHz clip-lead with PLL

  #6 opened 3 years ago by nonarkitten
  1

• No 12V should be needed for RTC

  #7 opened 3 years ago by nonarkitten
  2

• Verify signal names, states (input, output, or bidirectional), and polarity (active low).

  #1 opened 4 years ago by joethezombie
  9

• create .PLD files for the PAL equations that are known

  #4 opened 3 years ago by joethezombie
  1

• Verify original A1000 equations.

  #5 opened 4 years ago by joethezombie
  1

• Update board silkscreen with proper capacitor and resistor values

  #3 opened 4 years ago by joethezombie
  1

• BOM missing

  #2 opened 4 years ago by joethezombie
  1