This is a description of how to wire a Robotdyn W5500 module to an arduino nano.
W5500 ethernet modules are known to be way more reliable than ENC28J60 in combination with arduino.
Manufacturer website: Robotdyn w5500 module
Tutorial on how to edit the Ethernet.h library for the W5500: Instructables Arduino W5500
Pins
| Arduino | Robotdyn w5500 |
|---|---|
| physical pin 1 (ICSP) | RST |
| D8 | INT |
| D10 | CSN |
| physical pin 17 (ICSP) | MOSI |
| physical pin 18 (ICSP) | MISO |
| D13 | CLK |
| 5V (ICSP) | 5V |
| GND (ICSP) | GND |
I followed the same pins to which the shield (not the module) is connected to the nano, see below diagram. I did however put the MOSI, MISO and SCK, RST, GND and 5V to the ICSP pins of the arduino.
The pinout of the nano:
