john30/ebusd-configuration

Issues

• ThisMonthsEConsumptionHc only in full kilowatt hours

  #439 opened a month ago by nobbilie
  0

• E7C00 Unable to set Time&Date for Year 2024

  #438 opened a month ago by twa127
  0

• VC 20CS/1-5 ebus + VRC720/2

  #437 opened a month ago by keysim86
  0

• Vaillant VRC 720: bivalence and alternative points missing

  #435 opened 2 months ago by JanCeuleers
  2

• Does a VSC 146/4-5 90 support something like a "total hot water flow rate" ?

  #434 opened 2 months ago by berti-github
  1

• scanconfig picks config file, but only one string visible

  #431 opened 3 months ago by step21
  2

• VR70 - read mixer value?

  #433 opened 2 months ago by Commifreak
  1

• Missing configuration files

  #418 opened 6 months ago by TomStarren
  2

• vaillant/15.ctlv3.csv missing?

  #432 opened 2 months ago by nam-AH
  5

• Ebusd Config

  #427 opened 3 months ago by Bavop
  1

• Message Definition not matching

  #428 opened 3 months ago by thomasderendorf
  0

• Reading room humidity for VRC700 (register found, but in the "unusual" location)

  #417 opened 6 months ago by stadid
  4

• How to get/write "RoomTempCorr" on VRC720?

  #425 opened 4 months ago by rICTx-T1D
  11

• Supplying user credentials to Mosquito?

  #426 opened 4 months ago by Matt47989
  1

• Need to change via ebusctl the "d.00 Heating partial load" boiler menu setting

  #385 opened 10 months ago by telece2
  6

• CompressorHysteresisCooling not working in 08.hmu.csv

  #424 opened 5 months ago by MarkusGH
  0

• New message definition in 15.ctlv2.csv for zone quick veto control and information

  #423 opened 5 months ago by WulfgarW
  1

• why Vailant 470 HwcOPMode is read only ?

  #421 opened 5 months ago by KrzysiekZZZ
  0

• Auroflow exclusive solar station configuration file

  #420 opened 6 months ago by garageboxnv
  0

• Question on MQTT and HA

  #419 opened 6 months ago by wrongisthenewright
  3

• VWL 75/6 with MEH 97/6 an VRC720 missing functions

  #391 opened 10 months ago by kecksk0enig
  7

• After new release 08.hmu.csv, strange behavior heat pump Vaillant

  #405 opened 7 months ago by mthomalla
  6

• Saunier Duval Semiatek Condens 24 still not supported?

  #414 opened 8 months ago by mefisto22
  2

• can not send negative numbers via mqtt

  #413 opened 7 months ago by swi88
  2

• No definitions for VWF flexoTHERM exclusiv 87/4 / VWL arcoCOLLECT 87/4?

  #415 opened 7 months ago by Timon321
  3

• unit of measurement 'None' in device class ('temperature')

  #412 opened 8 months ago by minscof
  0

• Vaillant ecoVIT exclusiv VKK 226/4 0010007510

  #409 opened 8 months ago by jabdoa2
  1

• values myvaillant App vs ebus different / config issue?

  #410 opened 8 months ago by europeke
  2

• Data not updating correctly

  #408 opened 8 months ago by gelsas
  2

• how configure CSV for device behind VR32

  #381 opened 9 months ago by git-vr
  3

• TEM name config file

  #403 opened 9 months ago by Sandzeroo
  0

• Communication with ecoTEC plus stopped working

  #402 opened 9 months ago by eiabea
  2

• scanconfig picks wrong CSV

  #400 opened 9 months ago by jonathanschneider
  4

• ehp/CondensorTemp not published to MQTT

  #398 opened 9 months ago by hemagi
  8

• First steps

  #397 opened 9 months ago by sfoglia
  1

• Config and auto-detect for Vaillant EcoTec Pure VUW 236/7-2

  #395 opened 9 months ago by voltlog
  4

• 08HMU CurrentCompressorUtil datatype

  #396 opened 9 months ago by pulquero
  1

• 15.ctlv2.csv missing?

  #392 opened 9 months ago by hhw0088
  6

• Two eBus adapters v3 on one ebusd add-on with HAOS

  #394 opened 9 months ago by astrakhan-dimon
  0

• Problems with energy (energy/fuel) values and raw data Vaillant bai/vr700

  #390 opened 10 months ago by johannesbonn
  0

• Cannot write to energy counters: PrEnergyCountHwc1 PrEnergyCountHc1 PrEnergySumHwc1 PrEnergySumHc1

  #387 opened 10 months ago by KrzysiekZZZ
  2

• Demirdöküm Nitromix 24 - Same as Saunier Duval Semiatec Condense 24

  #379 opened a year ago by bayc4d
  2

• No config file for address 15 ID "bass2", SW0507, HW1704

  #382 opened 10 months ago by romP44
  1

• VWS141/3 + VR90

  #380 opened a year ago by Lenten1965
  0

• Config DONE valiant + sensoconfort 380

  #378 opened a year ago by 1achy
  0

• ecoTEC plus VMW 306/5-5 (H-ES) R6 customization thread

  #376 opened a year ago by gvisol
  0

• Kein Autostart unter BULLSEYE

  #374 opened a year ago by obduser
  0

• "no data stored" on all entries with "ebusctl find"

  #373 opened a year ago by kiuposa
  0

• Feature request:- make `ebusctl info` output the full path of the currently used config files

  #372 opened a year ago by tcwilkinson
  1

• ERR: invalid position in decode

  #371 opened a year ago by k-fil
  2