Pinned Repositories
BIGTREETECH-MINI-UPS-V2.0
BigTree Technology Co., Ltd. developed this power failure module to detect a power failure during printing and ensuring the print can be resumed after power is returns.
BIGTREETECH-SKR-V1.3
32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
BTT-TFT35-E3-V3.0
BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.
Configurations
Configurations for Marlin Firmware
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
FFCP-Marlin-Public
Flashforge Marlin Builds
flashforge_firmware_tool
:cyclone: FlashForge firmware tool allow you to decrypt and encrypt firmwares from FlashForge 3D printers, Dremel 3D20 and PowerSpec Ultra 3D
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
MarlinDocumentation
Marlin Firmware Documentation Project
johnnyo420's Repositories
johnnyo420/BIGTREETECH-MINI-UPS-V2.0
BigTree Technology Co., Ltd. developed this power failure module to detect a power failure during printing and ensuring the print can be resumed after power is returns.
johnnyo420/BIGTREETECH-SKR-V1.3
32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
johnnyo420/BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
johnnyo420/BTT-TFT35-E3-V3.0
BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.
johnnyo420/Configurations
Configurations for Marlin Firmware
johnnyo420/ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
johnnyo420/FFCP-Marlin-Public
Flashforge Marlin Builds
johnnyo420/flashforge_firmware_tool
:cyclone: FlashForge firmware tool allow you to decrypt and encrypt firmwares from FlashForge 3D printers, Dremel 3D20 and PowerSpec Ultra 3D
johnnyo420/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
johnnyo420/MarlinDocumentation
Marlin Firmware Documentation Project
johnnyo420/SKR-2