SoundMeter is a command-line tool to obtain sound power in real time. It basically turns the audio recording functionality into a sound meter for machines that ship with audio input devices (e.g. microphone). It currently reveals the root-mean-square (RMS) of sound fragments, which is a measure of the power in an audio signal. The actual values also depend on the system settings of sound input.
- A command-line meter that supports triggering upon events
- Monitor API for backend module programming
On Debian/Ubuntu:
$ sudo apt-get install portaudio19-dev python-dev alsa-utils
On Fedora/RHEL:
$ sudo yum install portaudio-devel python-devel alsa-utils
On OS X:
$ brew install portaudio
- argparse
- pyaudio
- pydub
- python-daemon
You can install the package with pip using the following command to allow externally hosted packages:
$ pip install soundmeter --allow-all-external --allow-unverified pyaudio
Or, you can download a source distribution and install with these commands:
$ python setup.py install
The simplest usage is to run "soundmeter" from command-line without any options:
$ soundmeter
Collect RMS values for 10 seconds so that you will know the sound level in the current environment:
$ soundmeter --collect --seconds 10
Collecting RMS values...
154 Timeout
Collected result:
min: 152
max: 211
avg: 156
You can set trigger and action for soundmeter.
Stop the soundmeter if RMS is greater than 211 consecutively for 3 times:
$ soundmeter --trigger +211 3 --action stop
Execute trigger.sh
if RMS is greater than 211:
$ soundmeter --trigger +211 --action exec --exec trigger.sh
Execute trigger.sh
and stop soundmeter if RMS is less than 152 consecutively for 3 times:
$ soundmeter --trigger -152 3 --action exec-stop --exec trigger.sh
Run the soundmeter with trigger and action in the background:
$ soundmeter --trigger +211 3 --action exec --exec trigger.sh --daemonize
Run the soundmeter for 2 minutes and log to meter.log
:
$ soundmeter --seconds 120 --log meter.log
The "soundmeter" command accepts the following options:
-c, --collect collect RMS values to determine thresholds -s SECS, --seconds SECS time in seconds to run the meter (default forever) -a ACTION_TYPE, --action ACTION_TYPE triggered action (
stop
,exec-stop
andexec
) -t THRESHOLD, --trigger THRESHOLD trigger condition (threshold RMS and an optional number of consecutive triggering times, which defaults 1) -e FILE, --execute FILE shell script to execute upon trigger (defaults to~/.soundmeter/trigger.sh
), can be configured to pass the "last triggering" RMS value as argument by settingrms_as_trigger_arg
toTrue
in ~/.soundmeter/config -d, --daemonize run the meter in the background --log LOGFILE log the meter (defaults to~/.soundmeter/log
) -v, --verbose verbose mode --segment SECONDS audio segment length recorded in seconds (defaults to 0.5); when specified, it overridesaudio_segment_length
in ~/.soundmeter/config
Some "dependency-required" parameters can be configured at ~/.soundmeter/config. The default configuration is:
[soundmeter]
frames_per_buffer = 2048
format = 8
channels = 2
rate = 44100
audio_segment_length = 0.5
rms_as_trigger_argument = False