Automatically converts media files downloaded by various programs to a standardized format, and tags them with the appropriate metadata from TMDB if the container supports tagging.
Works on Windows, OSX, and Linux. Despite the name works with much more than just Sickbeard and handles more than MP4s
- Python 3 (Python 2.7 unofficially supported)
- FFmpeg
- Python Packages
- Container - MP4
- Video - H264
- Audio - AAC 2.0 with additional AC3 track when source has >2 channels (ex 5.1)
- Subtitles - mov_text
Two official Docker containers are maintained for Radarr and Sonarr with SMA included. These are meant to work with completed download handling enabled. See the respective Docker Hub pages for details
- Download or compile FFmpeg
- Rename autoProcess.ini.sample to autoProcess.ini inside your
config
directory (or attempt to run the script which will generate a new config file if absent) - Set the configuration options to your desired output and include the path of your new FFmpeg / FFprobe binaries
- Run manual.py and test out a conversion
- Configure direct integration using the instructions below
- Set your Sonarr settings in autoProcess.ini
- Browse to the Settings>Download Client tab and enable advanced settings [Show].
- Set the Drone Factory Interval' to 0 to disable it, and disable 'Completed Download Handling' in Sonarr settings. The script will trigger a specific path re-scan, allowing the conversion to be completed before Sonarr starts moving stuff around. This step is optional if you do not desire any processing between the downloading by whichever downloader you choose (NZB or Torrent), but is required if you wish to convert the file before it is handed back to Sonarr. You must use either a download script or enabled Completed Download Handling. If neither are used the file will never be passed back
- Setup the postSonarr.py script via Settings > Connect > Connections > + (Add)
name
- postSonarrOn Grab
- NoOn Download
- YesOn Upgrade
- YesOn Rename
- NoPath
- Full path to your python executableArguments
- Full path topostSonarr.py
- For Sonarr V3 you'll need to make a .sh or .bat file to combine your path to python and script
- Set your Radarr settings in autoProcess.ini
- Browse to the Settings>Download Client tab and enable advanced settings [Show].
- Set the Drone Factory Interval' to 0 to disable it, and disable 'Completed Download Handling' in Radarr settings. The script will trigger a specific path re-scan, allowing the conversion to be completed before Radarr starts moving stuff around. This step is optional if you do not desire any processing between the downloading by whichever downloader you choose (NZB or Torrent), but is required if you wish to convert the file before it is handed back to Radarr. You must use either a download script or enabled Completed Download Handling. If neither are used the file will never be passed back
- Setup the postRadarr.py script via Settings > Connect > Connections > + (Add)
name
- postRadarrOn Grab
- NoOn Download
- YesOn Upgrade
- YesOn Rename
- NoPath
- Full path to your python executableArguments
- Full path topostRadarr.py
- For Radarr V3 you'll need to make a .sh or .bat file to combine your path to python and script
- Open Sickbeard's config.ini in Sick Beard installation folder
- Set "extra_scripts" value in the general section to the full path to "python postSickbeard.py" using double backslashes
- Example:
C:\\Python27\\python C:\\Scripts\\postSickbeard.py
- Make sure this is done while Sick Beard is not running or it will be reverted
- Example:
- Set "extra_scripts" value in the general section to the full path to "python postSickbeard.py" using double backslashes
- Set your SickBeard settings in autoProcess.ini
- Open the configuration page in Sickrage and scroll down to the option labelled "Extra Scripts". Here enter the path to python followed by the full script path. Examples:
C:\\Python27\\python.exe C:\\sickbeard_mp4_automator\\postSickbeard.py
/usr/bin/python /home/user/sickbeard_mp4_automator/postSickbeard.py
- Set the Sickrage settings in autoProcess.ini
- Set your CouchPotato settings in autoProcess.ini
- Edit
main.py
in thesetup\PostProcess
folder- Set the path variable to the script location
- By default it points to
C:\\Scripts\\
- Use double backslahses
- Copy the PostProcess directory from the setup folder included with this script to the CouchPotato
custom_plugins
directory- Navigate to the About page in CouchPotato, where the installation directory is displayed.
- Go to this folder and copy the PostProcess folder (the whole folder, not just the contents) to the CouchPotato
custom_plugins
directory - Delete any
.pyc
files you find. - Restart CouchPotato
- Verify in CouchPotato logs that PostProcess was loaded.
- If you're using one of the post download scripts ([SAB|NZBGet|uTorrent|deluge]PostProcess.py), disable automatic checking of the renamer folder, the script will automatically notify CouchPotato when it is complete to check for new videos to be renamed and relocated. Leaving this on may cause conflicts and CouchPotato may try to relocate/rename the file before processing is completed.
- Set
Run Every
to0
- Set
Force Every
to0
- If you aren't using one of these scripts and are using an unsupported downloader, you will need to have CouchPotato periodically check the folder for files, otherwise the post downloader scripts will manually trigger a renamer scan. Using manual triggers is helpful because it prevents a coincidental renamer scan during other processing events.
- Set
- Configure Downloaders
- In
Settings > Downloaders
configure your labels or categories to match what you have configured in your respective downloader.
- In
- Copy the script NZBGetPostProcess.py to NZBGet's script folder.
- Default location is /opt/nzbget/scripts/
- Start/Restart NZBGet
- Configure NZBGETPOSTPROCESS
- Access NZBGet's WebUI
- Default
localhost:6789
- Default
- Go to
Settings
- Select
NZBGETPOSTPROCESS
option at the bottom of the left hand navigation panel and configure the optionsMP4_FOLDER
- default~/sickbeard_mp4_automator/
- Location of the script. Use full path with trailing backslash.SHOULDCONVERT
-True
/False
- Convert file before passing to destinationCP_CAT
- defaultcouchpotato
- category of downloads that will be passed to CouchPotatoSONARR_CAT
- defaultsonarr
- category of downloads that will be passed to SonarrSICKBEARD_CAT
- defaultsickbeard
- category of downloads that will be passed to SickbeardSICKRAGE_CAT
- defaultsickrage
- category of downloads that will be passed to SickrageBYPASS_CAT
- defaultbypass
- category of downloads that may be converted but won't be passed on further
- Save changes
- Reload NZBGet
- Access NZBGet's WebUI
- When assigning categories in NZBGet and your chosen media manager, ensure they match the label settings specified here so that file will be passed back to the appropriate location.
- In the relevant category set
PostScript
to NZBGetPostProcess.py to ensure SMA is called.
- In the relevant category set
- Set your SABNZBD settings in autoProcess.ini
- Point SABNZBD's script directory to the root directory where you have extract the script.
- Configure categories. Categories will determine where the download is sent when it is finished
Settings > Categories
- Configure
name
to match the settings from theSABNZBD
section ofautoProcess.ini
- Default
sickbeard
- Default
sickrage
- Default
couchpotato
- Default
sonarr
- Default
bypass
- Default
- Select the SABPostProcess.py script
- Save EACH category
- Verify that whatever media manager you are using is assigning the label to match the label settings specified here so that file will be passed back to the appropriate location
- Create username and password for deluge daemon
- Navigate to your deluge configuration folder
%appdata%\Roaming\Deluge
in Windows/var/lib/deluge/.config/deluge/
in Linux
- Open the
auth
file - Add a username and password in the format
<username>:<password>:<level>
. Replace and with your choice and level with your desired authentication level. Default level is10
. Save auth.- Ex:
sampleuser:samplepass:10
- Ex:
- Navigate to your deluge configuration folder
- Start/Restart deluged
- deluged not deluge
- Access the WebUI
- Default port is
8112
- Default password is
deluge
- Default port is
- Enabled the
Execute
plugin- Add event for
Torrent Complete
- Set path to the full path to
delugePostProcess.py
or a batch file wrapper that passes command line arguments for Windows users with difficulty executing python files directly
- Add event for
- Set your Deluge settings in autoProcess.ini
- Verify that whatever downloader you are using is assigning the label to match the label settings specified here so that file will be passed back to the appropriate location
- Launch uTorrent
- Set
Run Program
option- Go to
Options > Preferences > Advanced > Run Program
- Point to
uTorrentPostProcess.py
with command line parameters:%L %T %D %K %F %I %N
in that exact order.
- Go to
- Set your uTorrent settings in autoProcess.ini
- Verify that whatever media manager you are using is assigning the label to match the label settings specified here so that file will be passed back to the appropriate location
- Launch qBittorrent
- Set
Run Program
option- Go to
Tools > Options > Run external program on torrent completion
- Point to
qBittorrentPostProcess.py
with command line parameters:"%L" "%T" "%R" "%F" "%N" "%I"
in that exact order.
- Go to
- Set your qBittorrent settings in autoProcess.ini
- Verify that whatever media manager you are using is assigning the label to match the label settings specified here so that file will be passed back to the appropriate location
Send a Plex notification as the final step when all processing is completed. This feature prevents a file from being flagged as "in use" by Plex before processing has completed.
- Disable automatic refreshing on your Plex server
Settings > Server > Library
and disableUpdate my library automatically
andUpdate my library periodically
.
- Set your Plex settings in autoProcess.ini
If you have secure connections enabled with Plex you will need to add your local IP addresss that the refresh requests are coming from to allow them to trigger the refresh, otherwise you will get an HTTP error. You can alternatively not force encryption by changing Secure Connections
from Required
to Preferred
but this is not recommended as its less secure.
Found under Plex Server Settings > Network > Advanced
If for some reason you need to override the path to autoProcess.ini (for virtual environments, containers, etc) you can use the environment variable SMA_CONFIG
to the absolute path
The script suite supports the ability to write your own post processing scripts that will be executed when all the final processing has been completed. All scripts in the ./post_process
directory will be executed if the post-process
option is set to True
in autoProcess.ini
. Scripts within the ./post_process/resources
directory are protected from execution if additional script resources are required.
The following environmental variables are available for usage:
SMA_FILES
- JSON Array of all files created by the post processing script. The first file in the array is the primary file, and any additional files are copies created by the copy-to optionSMA_TVDBID
- TVDB ID if file processed was a TV show and this information is availableSMA_SEASON
- Season number if file processed was a TV showSMA_EPISODE
- Episode number if files processed was a TV showSMA_IMDBID
- IMDB ID if file processed was a movie A sample script as well as an OS X 'Add to iTunes' script (iTunes.py
) have been provided.
Special thanks to @jzucker2 for providing much of the initial code for this feature
To run the script manually, simply run the manual.py file and follow the prompts it presents. If you wish to run it via the command line (good for batch operations) follow this format:
Help output
manual.py -h
usage: manual.py [-h] [-i INPUT] [-a] [-tv TVDBID] [-s SEASON] [-e EPISODE]
[-imdb IMDBID] [-tmdb TMDBID] [-nm] [-nc] [-nd]
Manual conversion and tagging script for sickbeard_mp4_automator
optional arguments:
-h, --help show this help message and exit
-i INPUT, --input INPUT
The source that will be converted. May be a file or a
directory
--config Specify an alternate configuration file location
-a, --auto Enable auto mode, the script will not prompt you for
any further input, good for batch files. It will guess
the metadata using guessit
-tmdb TMDBID, --tmdbid TMDBID
Specify the TMDB ID for media
-tvdb TVDBID, --tvdbid TMBDID
Specify the TVDB ID for media
-imdb IMDBID, --imdbid IMDBID
Specify the IMDB ID for media
-s SEASON, --season SEASON
Specifiy the season number
-e EPISODE, --episode EPISODE
Specify the episode number
-nm, --nomove Overrides and disables the custom moving of file
options that come from output_dir and move-to
-m, --moveto Override move-to value setting in autoProcess.ini
changing the final destination of the file
-nc, --nocopy Overrides and disables the custom copying of file
options that come from output_dir and move-to
-nt, --notag Overrides and disables tagging when using the
automated option
-nd, --nodelete Overrides and disables deleting of original files
-pr, --preserverelative
Preserves relative directories when processing
multiple files using the copy-to or move-to
functionality
-pse, --processsameextensions
Overrides process-same-extensions setting in
autoProcess.ini enabling the reprocessing of files
-fc, --forceconvert Overrides force-convert setting in autoProcess.ini and
also enables process-same-extenions if true forcing the conversion of files
-oo, --optionsonly Display generated conversion options only, do not perform conversion
-cl, --codeclist Print a list of supported codecs and their paired FFMPEG encoders
Examples
Movies (using IMDB ID):
manual.py -i mp4path -imdb imdbid
Example: manual.py -i "C:\The Matrix.mkv" -imdb tt0133093
Movies (using TMDB ID)
manual.py -i mp4path -tmdb tmdbid
Example: manual.py -i "C:\The Matrix.mkv" -tmdb 603
TV
manual.py -i mp4path -tvdb tmbdid -s season -e episode
Example: manual.py -i "C:\Futurama S03E10.mkv" -tvdb 73871 -s 3 -e 10
Auto Single File (will gather movie ID or TV show ID / season / spisode from the file name if possible)
manual.py -i mp4path -a
Example: manual.py -i "C:\Futurama S03E10.mkv" -a
Directory (you will be prompted at each file for the type of file and ID)
manual.py -i directory_path
Example: manual.py -i C:\Movies
Automated Directory (The script will attempt to figure out appropriate tagging based on file name)
manual.py -i directory_path -a
Example: manual.py -i C:\Movies -a
Process a directory but manually specific TVDB ID (Good for shows that don't correctly match using the guess)
manual.py -i directory -a -tvdb tvdbid
Example: manual.py -i C:\TV\Futurama\ -a -tvdb 615
You may also simply run manual.py -i 'C:\The Matrix.mkv
and the script will prompt you for the missing information or attempt to guess based on the file name.
You may run the script with a --auto
or -a
switch, which will let the script guess the tagging information based on the file name, avoiding any need for user input. This is the most ideal option for large batch file operations.
The script may also be pointed to a directory, where it will process all files in the directory. If you run the script without the -a
switch, you will be prompted for each file with options on how to tag, to convert without tagging, or skip.
To use your own cover art instead of what the script pulls from TMDB or TVDB, simply place an image file in the same directory as the input video with the same name before processing and it will be used. Must be jpg
or png
To import external subtitles, place the .srt file in the same directory as the file to be processed. The srt must have the same name as the input video file, as well as the language code for which the subtitle is. Subtitle importing obeys the langauge rules set in autoProcess.ini, so languages that aren't whitelisted will be ignored.
Naming example:
input mkv - The.Matrix.1999.mkv
subtitle srt - The.Matrix.1999.eng.srt
This project makes use of, integrates with, or was inspired by the following projects:
- http://www.ffmpeg.org/
- http://www.python.org/
- http://www.sickbeard.com/
- http://couchpota.to/
- http://sabnzbd.org/
- https://nzbget.net/
- https://www.deluge-torrent.org/
- https://www.qbittorrent.org/
- http://github.com/senko/python-video-converter
- https://github.com/celiao/tmdbsimple
- https://github.com/quodlibet/mutagen
- http://github.com/danielgtaylor/qtfaststart
- http://github.com/wackou/guessit
- http://github.com/Diaoul/subliminal
- http://sonarr.tv/
- http://radarr.video/